public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Ulf Samuelsson <ulf@atmel.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [GIT PULL] AVR32 fixes
Date: Mon, 15 Oct 2007 15:40:29 +0200	[thread overview]
Message-ID: <007801c80f31$52d19460$01c4af0a@Glamdring> (raw)
In-Reply-To: 20071015111837.3aed4288@dhcp-255-175.norway.atmel.com

----- Original Message ----- 
From: "Haavard Skinnemoen" <hskinnemoen@atmel.com>
To: "Grant Likely" <grant.likely@secretlab.ca>
Cc: "U-Boot Users" <u-boot-users@lists.sourceforge.net>; 
<u-boot@avr32linux.org>; "Wolfgang Denk" <wd@denx.de>
Sent: Monday, October 15, 2007 11:18 AM
Subject: Re: [U-Boot-Users] [GIT PULL] AVR32 fixes


> On Sun, 14 Oct 2007 16:22:40 -0600
> "Grant Likely" <grant.likely@secretlab.ca> wrote:
>
>> On 10/14/07, Haavard Skinnemoen <hskinnemoen@atmel.com> wrote:
>> > Ok, since it's obviously best if the patches are sent to this list
>> > in the first place, I've added a note to
>> >
>> > http://avr32linux.org/twiki/bin/view/Main/MailingLists
>> >
>> > I'll try to catch the ones that aren't and pass them on before
>> > merging.
>>
>> Can you drop the AVR32 u-boot mailing list entirely and direct posters
>> here?  It's not like the u-boot list is high volume and it would be
>> better to discuss even arch specific changes in the common forum.
>
> Yeah, that's a good point. When we created the kernel list at
> avr32linux.org we sort of figured it might be a good idea to create one
> for u-boot as well. Perhaps that was a bad move.
>
> However, I'm a bit afraid of losing some of the potential testers that
> are subscribed to that list. Contributors should probably subscribe to
> u-boot-users to get a better feeling of the whole picture, but I
> suspect that some people aren't all that interested in everything that
> happens on the main mailing list, while they might very well be
> interested in testing specific bugfixes or improvements targeted
> towards avr32 boards.
>
> I think the avr32linux.org list is also a good place to announce
> releases and pre-releases of our "vendor" loaders. Those are probably
> only interesting to people using avr32.
>
> So I think I want to keep the list for now, as a very-low-volume
> avr32-specific thing. The volume on u-boot-users seems to be picking
> up; that's a good thing, but it may also drive some users away.
>

You can forward everything on the AVR32 list to the normal u-boot list 
easily,
adding [AVR32] to the header.
You could also filter the u-boot list, and anything on this list with 
[AVR32]
in the header gets forwarded to the AVR32 list (without bouncing back of 
course)


> H?vard
>


Best Regards
Ulf Samuelsson                ulf at atmel.com
Atmel Nordic AB
Mail:  Box 2033, 174 02 Sundbyberg, Sweden
Visit:  Kavalleriv?gen 24, 174 58 Sundbyberg, Sweden
Phone +46 (8) 441 54 22     Fax +46 (8) 441 54 29
GSM    +46 (706) 22 44 57

Technical support when I am not available:
AT89 C51 Applications Group: mailto:micro.hotline at nto.atmel.com
AT90 AVR Applications Group: mailto:avr at atmel.com
AT91 ARM Applications Group: mailto:at91support at atmel.com
FPSLIC Application Group: mailto:fpslic at atmel.com Best AVR
link: www.avrfreaks.net 

  reply	other threads:[~2007-10-15 13:40 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-10-07 12:06 [U-Boot-Users] [GIT PULL] AVR32 fixes Haavard Skinnemoen
2007-10-13 21:11 ` Wolfgang Denk
2007-10-13 23:16   ` Haavard Skinnemoen
2007-10-13 23:38     ` Wolfgang Denk
2007-10-14 12:35       ` Haavard Skinnemoen
2007-10-14 22:22         ` Grant Likely
2007-10-15  9:18           ` Haavard Skinnemoen
2007-10-15 13:40             ` Ulf Samuelsson [this message]
2007-10-15 14:16               ` Haavard Skinnemoen
  -- strict thread matches above, loose matches on Subject: below --
2008-02-05 11:30 Haavard Skinnemoen
2008-02-14 23:15 ` Wolfgang Denk
2007-08-13 15:42 Haavard Skinnemoen
2007-08-13 20:05 ` Wolfgang Denk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='007801c80f31$52d19460$01c4af0a@Glamdring' \
    --to=ulf@atmel.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox