public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
* [U-Boot-Users] Atmel ATNGW100 config file anyone?
@ 2007-04-12  1:06 Robin Gilks
  2007-04-12  5:20 ` Ulf Samuelsson
  0 siblings, 1 reply; 2+ messages in thread
From: Robin Gilks @ 2007-04-12  1:06 UTC (permalink / raw)
  To: u-boot

Greetings

The subject says it all really!!

I've applied the u-boot-1.1.6-hs1.patch from avrforums to git head (no 
errors, just a couple of offset & fuzzy matches) so I'm hoping to be 
able to build a u-boot image with networking for the new avr32 demo board.

The board is on order but I don't know what to expect by way of 
pre-loaded firmware - especially what capabilities it will have.

Any pointers gratefully received:-)

-- 
Robin

=======================================================================
This email, including any attachments, is only for the intended
addressee.  It is subject to copyright, is confidential and may be
the subject of legal or other privilege, none of which is waived or
lost by reason of this transmission.
If the receiver is not the intended addressee, please accept our
apologies, notify us by return, delete all copies and perform no
other act on the email.
Unfortunately, we cannot warrant that the email has not been
 altered or corrupted during transmission.
=======================================================================

^ permalink raw reply	[flat|nested] 2+ messages in thread

* [U-Boot-Users] Atmel ATNGW100 config file anyone?
  2007-04-12  1:06 [U-Boot-Users] Atmel ATNGW100 config file anyone? Robin Gilks
@ 2007-04-12  5:20 ` Ulf Samuelsson
  0 siblings, 0 replies; 2+ messages in thread
From: Ulf Samuelsson @ 2007-04-12  5:20 UTC (permalink / raw)
  To: u-boot

> Greetings
> 
> The subject says it all really!!
> 
> I've applied the u-boot-1.1.6-hs1.patch from avrforums to git head (no 
> errors, just a couple of offset & fuzzy matches) so I'm hoping to be 
> able to build a u-boot image with networking for the new avr32 demo board.
> 
> The board is on order but I don't know what to expect by way of 
> pre-loaded firmware - especially what capabilities it will have.
> 

You will get a board with U-Boot / Linux / Root filesystem
but all the S/W is inside the AVR32 BSP 2.0
which is downloadable from www.atmel.com (or soon will be)
There is no CD included in the kit.

I think that the BSP should contain the needed config file.

> Any pointers gratefully received:-)
> 
> -- 
> Robin
> 


Best Regards
Ulf Samuelsson                ulf at atmel.com
Atmel Nordic AB
Mail:  Box 2033, 174 02 Sundbyberg, Sweden
Visit:  Kavalleriv?gen 24, 174 58 Sundbyberg, Sweden
Phone +46 (8) 441 54 22     Fax +46 (8) 441 54 29
GSM    +46 (706) 22 44 57

Technical support when I am not available:
AT90 AVR Applications Group: mailto:avr at atmel.com
AT91 ARM Applications Group: mailto:at91support at atmel.com
AVR32 Applications Group        mailto:avr32 at atmel.com
http://www.avrfreaks.net/;            http://avr32linux.org/
http://www.at91.com/ ;                ftp://at91dist:distrib at 81.80.104.162/

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2007-04-12  5:20 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-04-12  1:06 [U-Boot-Users] Atmel ATNGW100 config file anyone? Robin Gilks
2007-04-12  5:20 ` Ulf Samuelsson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox