From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ulf Samuelsson Date: Thu, 12 Apr 2007 07:20:12 +0200 Subject: [U-Boot-Users] Atmel ATNGW100 config file anyone? References: <461D860C.8000100@tait.co.nz> Message-ID: <007c01c77cc4$4094db40$dcc4af0a@atmel.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > Greetings > > The subject says it all really!! > > I've applied the u-boot-1.1.6-hs1.patch from avrforums to git head (no > errors, just a couple of offset & fuzzy matches) so I'm hoping to be > able to build a u-boot image with networking for the new avr32 demo board. > > The board is on order but I don't know what to expect by way of > pre-loaded firmware - especially what capabilities it will have. > You will get a board with U-Boot / Linux / Root filesystem but all the S/W is inside the AVR32 BSP 2.0 which is downloadable from www.atmel.com (or soon will be) There is no CD included in the kit. I think that the BSP should contain the needed config file. > Any pointers gratefully received:-) > > -- > Robin > Best Regards Ulf Samuelsson ulf at atmel.com Atmel Nordic AB Mail: Box 2033, 174 02 Sundbyberg, Sweden Visit: Kavalleriv?gen 24, 174 58 Sundbyberg, Sweden Phone +46 (8) 441 54 22 Fax +46 (8) 441 54 29 GSM +46 (706) 22 44 57 Technical support when I am not available: AT90 AVR Applications Group: mailto:avr at atmel.com AT91 ARM Applications Group: mailto:at91support at atmel.com AVR32 Applications Group mailto:avr32 at atmel.com http://www.avrfreaks.net/; http://avr32linux.org/ http://www.at91.com/ ; ftp://at91dist:distrib at 81.80.104.162/