* [U-Boot-Users] VxWorks and Windows
@ 2004-04-01 8:21 Shlomo_Kut at mksinst.com
2004-04-01 8:36 ` ganapathi
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Shlomo_Kut at mksinst.com @ 2004-04-01 8:21 UTC (permalink / raw)
To: u-boot
Hi,
Has anybody any tips to share about using u-boot with VxWorks?
Does anybody know if there is a freeware Linux emulation program that can
be used to run GNU tools under Windows?
Thank you for your time,
Shlomo Kut
Software Engineer
MKS Instruments
Tenta Products
Tel: 972-8-9181015
Fax: 972-8-9181020
www.mksinst.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot-Users] VxWorks and Windows
2004-04-01 8:21 [U-Boot-Users] VxWorks and Windows Shlomo_Kut at mksinst.com
@ 2004-04-01 8:36 ` ganapathi
2004-04-01 11:14 ` Wolfgang Denk
2004-04-02 4:38 ` Sangmoon Kim
2 siblings, 0 replies; 6+ messages in thread
From: ganapathi @ 2004-04-01 8:36 UTC (permalink / raw)
To: u-boot
Hi,
You can use cygwin to run GNU tools under windows.
Regards
Ganapathi C
----- Original Message -----
From: <Shlomo_Kut@mksinst.com>
To: <u-boot-users@lists.sourceforge.net>
Sent: Thursday, April 01, 2004 1:51 PM
Subject: [U-Boot-Users] VxWorks and Windows
>
> Hi,
>
> Has anybody any tips to share about using u-boot with VxWorks?
>
> Does anybody know if there is a freeware Linux emulation program that can
> be used to run GNU tools under Windows?
>
> Thank you for your time,
>
> Shlomo Kut
>
> Software Engineer
> MKS Instruments
> Tenta Products
> Tel: 972-8-9181015
> Fax: 972-8-9181020
> www.mksinst.com
>
>
>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: IBM Linux Tutorials
> Free Linux tutorial presented by Daniel Robbins, President and CEO of
> GenToo technologies. Learn everything from fundamentals to system
> administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot-Users] VxWorks and Windows
@ 2004-04-01 8:50 Mészáros Lajos
0 siblings, 0 replies; 6+ messages in thread
From: Mészáros Lajos @ 2004-04-01 8:50 UTC (permalink / raw)
To: u-boot
VxWorks is a nightmare.
Don't use it if You can.
Ludwig
> -----Eredeti ?zenet-----
> Felad?: Shlomo_Kut at mksinst.com [mailto:Shlomo_Kut at mksinst.com]
> K?ldve: Thursday, April 01, 2004 10:21 AM
> C?mzett: u-boot-users at lists.sourceforge.net
> T?rgy: [U-Boot-Users] VxWorks and Windows
---snip
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot-Users] VxWorks and Windows
2004-04-01 8:21 [U-Boot-Users] VxWorks and Windows Shlomo_Kut at mksinst.com
2004-04-01 8:36 ` ganapathi
@ 2004-04-01 11:14 ` Wolfgang Denk
2004-04-01 16:01 ` Frank
2004-04-02 4:38 ` Sangmoon Kim
2 siblings, 1 reply; 6+ messages in thread
From: Wolfgang Denk @ 2004-04-01 11:14 UTC (permalink / raw)
To: u-boot
In message <OF26590990.C72E7950-ON42256E69.002DAC21-08256E69.002DE0EF@mksinst.com> you wrote:
>
> Has anybody any tips to share about using u-boot with VxWorks?
Just use U-boot to load and start VxWorks.
> Does anybody know if there is a freeware Linux emulation program that can
> be used to run GNU tools under Windows?
Many people will point you to Cygwin; but you will soon learn a
lesson (see signature below).
Best regards,
Wolfgang Denk
--
The use of Microsoft crippleware systems is a sin that carries with
it its own punishment.
-- Tom Christiansen in <6bo3fr$pj8$5@csnews.cs.colorado.edu>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot-Users] VxWorks and Windows
2004-04-01 11:14 ` Wolfgang Denk
@ 2004-04-01 16:01 ` Frank
0 siblings, 0 replies; 6+ messages in thread
From: Frank @ 2004-04-01 16:01 UTC (permalink / raw)
To: u-boot
Why would you use Cygwin when Linux is free. That's like driving
a Volkswagen with Ferrari skins when you can afford to buy the
real thing.:-)
--- Wolfgang Denk <wd@denx.de> wrote:
> In message
>
<OF26590990.C72E7950-ON42256E69.002DAC21-08256E69.002DE0EF@mksinst.com>
> you wrote:
> >
> > Has anybody any tips to share about using u-boot with
> VxWorks?
>
> Just use U-boot to load and start VxWorks.
>
> > Does anybody know if there is a freeware Linux emulation
> program that can
> > be used to run GNU tools under Windows?
>
> Many people will point you to Cygwin; but you will soon
> learn a
> lesson (see signature below).
>
> Best regards,
>
> Wolfgang Denk
>
> --
> The use of Microsoft crippleware systems is a sin that
> carries with
> it its own punishment.
> -- Tom Christiansen in
> <6bo3fr$pj8$5@csnews.cs.colorado.edu>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: IBM Linux Tutorials
> Free Linux tutorial presented by Daniel Robbins, President and
> CEO of
> GenToo technologies. Learn everything from fundamentals to
> system
>
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
__________________________________
Do you Yahoo!?
Yahoo! Small Business $15K Web Design Giveaway
http://promotions.yahoo.com/design_giveaway/
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot-Users] VxWorks and Windows
2004-04-01 8:21 [U-Boot-Users] VxWorks and Windows Shlomo_Kut at mksinst.com
2004-04-01 8:36 ` ganapathi
2004-04-01 11:14 ` Wolfgang Denk
@ 2004-04-02 4:38 ` Sangmoon Kim
2 siblings, 0 replies; 6+ messages in thread
From: Sangmoon Kim @ 2004-04-02 4:38 UTC (permalink / raw)
To: u-boot
Hi,
>
> Does anybody know if there is a freeware Linux emulation program that can
> be used to run GNU tools under Windows?
>
Do you need to run GNU tools under Windows because Vxworks doesn't support
Linux as its development environment and you have to also compile u-boot?
If so, use Linux as a VxWorks development environment.
There is an open source project to do it (which I made).
Visit http://vxtools.sourceforge.net/
Regards,
Sangmoon Kim
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2004-04-02 4:38 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-04-01 8:21 [U-Boot-Users] VxWorks and Windows Shlomo_Kut at mksinst.com
2004-04-01 8:36 ` ganapathi
2004-04-01 11:14 ` Wolfgang Denk
2004-04-01 16:01 ` Frank
2004-04-02 4:38 ` Sangmoon Kim
-- strict thread matches above, loose matches on Subject: below --
2004-04-01 8:50 Mészáros Lajos
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox