From mboxrd@z Thu Jan  1 00:00:00 1970
From: Zhao Hongda <zhaohd@vis.cs.tsinghua.edu.cn>
Date: Tue, 8 Apr 2003 20:44:14 -0700
Subject: [U-Boot-Users] Why my image isn't boot? 
Message-ID: <00ef01c2fe4a$4a3dbbf0$fe02a8c0@esd11>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

 How poor I am,
 I am just have a JTAG cable and a RS232 cable connect to lubbock,
 then what should I do?
                                     Hongda Zhao
> ----- Original Message -----
> From: "Wolfgang Denk" <wd@denx.de>
> To: "Zhao Hongda" <zhaohongda@tsinghua.org.cn>
> Cc: <u-boot-users@lists.sourceforge.net>
> Sent: Tuesday, April 08, 2003 5:30 AM
> Subject: Re: [U-Boot-Users] Why my image isn't boot?
> 
> 
> > In message <00af01c2fe45$e8dab100$fe02a8c0@esd11> you wrote:
> > > I use the u-boot cvs source,
> > > linux-2.4.19 kernel, arm-linux patch, and xscale patch.
> > > arm-linux-gcc 3.0 as complier,lubbock(pxa250) as platform.
> > >
> > >     arm-linux-objcopy -O binary -R .note -R .comment -S vmlinux
> linux.bin
> > >     gzip -9 linux.bin
> > >     mkimage -A arm -O linux -T kernel -C gzip -a 0xa0008000 -e
> 0xa0008000 -n
> > > "Linux Kernel Image" -d linux.bin.gz uImage
> > > then under u-boot:
> > >     =>loadb 0xa0008000 (send the uImage)
> > >     =>go 0xa0008000
> > >     start the application at 0xa0008000
> > >     <hang>
> > >
> > > Could someone help me about this? Thanks a lot.
> >
> > Type "where" and "bt" at your GDB prompt.  Umm...  you  are  using  a
> > debugger like the BDI2000, aren't you?
> >
> >
> > Wolfgang Denk
> >
> > --
> > Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
> > Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
> > Schshschshchsch.
> > -- The Gorn, "Arena", stardate 3046.2
>