[U-Boot-Users] hi

[U-Boot-Users] hi

[Dannel_Zhang]

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20030916/8e614b15/attachment.htm 

[U-Boot-Users] hi

[erik.teose at exgate.tek.com]

OK, Wolfgang, want to take this one? :-)

Erik

-----Original Message-----
From: Dannel_Zhang
To: u-boot-users at lists.sourceforge.net
Sent: 9/15/2003 9:25 PM
Subject: [U-Boot-Users] hi

 

[U-Boot-Users] hi

[Wolfgang Denk]

In message <BA0E4392AD99D040885C414D992C24BE03615547@us-bv-m11.bv.tek.com> you wrote:
> OK, Wolfgang, want to take this one? :-)
> 
> Erik
> 
> -----Original Message-----
> From: Dannel_Zhang
> To: u-boot-users at lists.sourceforge.net
> Sent: 9/15/2003 9:25 PM
> Subject: [U-Boot-Users] hi
> 

What do you meen?  I  didn't  receive  the  original  message  you're
quoting. [was this from a hotmail address? I spamblock this domain.]

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
You can't have everything... where would you put it?  - Steven Wright

[U-Boot-Users] Hi

[kushal ahuja]

Could any one tell me personally what could be right combination of
1. binutils
2  gcc
3  glibc

for making a TOOL CHAIN for ARM in linux-2.4
-- 
Best Regards,
Kushal Ahuja
SWT
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060710/0ef046a8/attachment.htm 

[U-Boot-Users] Hi

[Wolfgang Denk]

In message <3d261bac0607100230m6752e6d0yd2e75d8113875470@mail.gmail.com> you wrote:
> 
> Could any one tell me personally what could be right combination of
> 1. binutils
> 2  gcc
> 3  glibc
> 
> for making a TOOL CHAIN for ARM in linux-2.4

ELDK 3.1.1

> ------=_Part_133851_507340.1152523838362
> Content-Type: text/html; charset=ISO-8859-1
> Content-Transfer-Encoding: 7bit
> Content-Disposition: inline

But NEVER post HTML here!

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I am not now, nor have I ever been, a member of the demigodic party.
                                                   -- Dennis Ritchie

[U-Boot-Users] Hi

[Shikoba Wicks]

Hi,

VALvlUM

ClAvLIS

AMBvlEN

VlAvGRA

Economize 60% http://www.phlaprlapi.info
 
  _____  


guys, that this is the warmest welcome we have ever received?
and find out?
was there in the cage; it wasnt a holoflic. He looked at me and


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20061004/618e9ab3/attachment.htm 

[U-Boot-Users] hi

[Lionel Eberle]

Hi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20061124/7e288736/attachment.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: merg40.gif
Type: image/gif
Size: 4107 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20061124/7e288736/attachment.gif 

[U-Boot-Users] hi

[arun c]

Hi, I am new to U-Boot, how do I get started?


And my  intention is  to port u-boot to omap2430 SDP with pop memory........

This pop memory thing will make any diffrence????

please help
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070615/874fac18/attachment.htm 

[U-Boot-Users] hi

[arun c]

Hi, I am new to U-Boot, how to get started??

please somebody help me ...

And my  aim is  to port U-boot to omap2430 SDP with pop memory processor
board.
Anybody worked on porting of  U-boot to  omap2430sdp?? please send me in
details  where to start??
And
1) what the lowest version of tool chain (arm cross compiler) i must use  to
cross-compile u-boot


i want to know what will be the diffrences in porting U-boot to a processor
without pop memory and with pop memory


please help me
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070616/fea37fb5/attachment.htm 

[U-Boot-Users] Hi

[Pooja]

Hello I just started working with U boot and i haven't got a clue how and
what to do.
can someone please help me out.
Pooja Adiga
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080122/90202aaa/attachment.htm 

[U-Boot-Users] Hi

[Markus Klotzbücher]

Pooja <poojaadiga@gmail.com> writes:

> Hello I just started working with U boot and i haven't got a clue how
> and what to do.

How are we supposed to help you if you don't even know what you want to
do? Reading the README is always a good start though.

Best regards

Markus Klotzbuecher

--
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de

[U-Boot-Users] hi

[zhouyangxzaq]

 Hi ,
I have downloaded u-boot latest version 1.1.6 from the sourceforge.net
I have installed cross compiler for arm.
my  board and cross compiler :
  board: sbc2410x 
  cross compiler: 2.95.3
  cpu:   arm920t
  pc enviroment :red hat 9
  u-boot: 1.1.6
1).i set the enviroment variable
   #vi /etc/profile
    --------/usr/local/arm/2.95.3/bin
2).I am using following procedure to compile:*
  make sbc2410x_config
  make all

3).I am getting an error indicates that *"arm-linux-gcc: unrecognized
option `-MQ'"*
the discrete information is the following :
  ~skip~
  ~skip~
*make[1]: Leaving directory `/home/hcac/u-boot-1.1.6/post/cpu'
make -C cpu/arm920t start.o
make[1]: Entering directory `/home/hcac/u-boot-1.1.6/cpu/arm920t'
arm-linux-gcc: start.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: cpu.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: interrupts.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
make[1]: *** [.depend] Error 1
make[1]: Leaving directory `/home/hcac/u-boot-1.1.6/cpu/arm920t'
make: *** [cpu/arm920t/start.o] Error 2*
*
Thanks
zhouyang
------- 
 
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080229/ba14c35b/attachment.htm 

[U-Boot-Users] hi

[Wolfgang Denk]

In message <20023941.294831204263480110.JavaMail.coremail@bj163app53.163.com> you wrote:
>
>  Hi ,

Please read http://catb.org/esr/faqs/smart-questions.html and chose a
more descriptive subject next time. Thanks.

> I have downloaded u-boot latest version 1.1.6 from the sourceforge.net

This is not the latest version, it is ancient cruft. Please see
http://www.denx.de/wiki/UBoot/SourceCode

> ------=_Part_78494_28602099.1204263480108
> Content-Type: text/html; charset=gbk
> Content-Transfer-Encoding: quoted-printable

And never ever post HTML here!

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
f u cn rd ths, itn tyg h myxbl cd.