U-Boot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Jaehoon Chung" <jh80.chung@samsung.com>
To: "'Shree Ramamoorthy'" <s-ramamoorthy@ti.com>,
	<u-boot@lists.denx.de>, <trini@konsulko.com>
Cc: <m-leonard@ti.com>, <praneeth@ti.com>
Subject: RE: [PATCH v1 2/2] power: replace magic numbers with macros
Date: Thu, 19 Dec 2024 07:44:41 +0900	[thread overview]
Message-ID: <01e401db519e$6d116220$47342660$@samsung.com> (raw)
In-Reply-To: <20241218171236.1022565-3-s-ramamoorthy@ti.com>

Hi,

> -----Original Message-----
> From: Shree Ramamoorthy <s-ramamoorthy@ti.com>
> Sent: Thursday, December 19, 2024 2:13 AM
>
> Replace magic numbers in buckval2votl() & buckvolt2val() with macros to
> help with clarity and correlate what the numbers correspond to in the
> TPS65219 datasheet.
>
> Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
> ---
>  drivers/power/regulator/tps65219_regulator.c | 26 ++++++++++----------
>  include/power/tps65219.h                     | 14 +++++++++--
>  2 files changed, 25 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/power/regulator/tps65219_regulator.c
> b/drivers/power/regulator/tps65219_regulator.c
> index 4b0fb205909a..88abc896b3a2 100644
> --- a/drivers/power/regulator/tps65219_regulator.c
> +++ b/drivers/power/regulator/tps65219_regulator.c
> @@ -72,12 +72,12 @@ static int tps65219_buck_enable(struct udevice *dev, int op, bool *enable)
>
>  static int tps65219_buck_volt2val(int uV)
>  {
> -	if (uV > TPS65219_BUCK_VOLT_MAX)
> +	if (uV > TPS65219_BUCK_3V4)
>  		return -EINVAL;
> -	else if (uV >= 1400000)
> -		return (uV - 1400000) / 100000 + 0x20;
> -	else if (uV >= 600000)
> -		return (uV - 600000) / 25000 + 0x00;
> +	else if (uV >= TPS65219_BUCK_1V4)
> +		return (uV - TPS65219_BUCK_1V4) / TPS65219_VOLT_STEP_100MV + TPS65219_BUCK_REG_1V4;

Even though Not relevant to this subject. If uV is 340000, the return value is correct?

Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>

Best Regards,
Jaehoon Chung

> +	else if (uV >= TPS65219_BUCK_0V6)
> +		return (uV - TPS65219_BUCK_0V6) / TPS65219_VOLT_STEP_25MV + TPS65219_BUCK_REG_0V6;
>  	else
>  		return -EINVAL;
>  }
> @@ -86,12 +86,12 @@ static int tps65219_buck_val2volt(int val)
>  {
>  	if (val > TPS65219_VOLT_MASK)
>  		return -EINVAL;
> -	else if (val > 0x34)
> -		return TPS65219_BUCK_VOLT_MAX;
> -	else if (val > 0x20)
> -		return 1400000 + (val - 0x20) * 100000;
> -	else if (val >= 0)
> -		return 600000 + val * 25000;
> +	else if (val > TPS65219_BUCK_REG_3V4)
> +		return TPS65219_BUCK_3V4;
> +	else if (val > TPS65219_BUCK_REG_1V4)
> +		return TPS65219_BUCK_1V4 + (val - TPS65219_BUCK_REG_1V4) * TPS65219_VOLT_STEP_100MV;
> +	else if (val >= TPS65219_BUCK_REG_0V6)
> +		return TPS65219_BUCK_0V6 + val * TPS65219_VOLT_STEP_25MV;
>  	else
>  		return -EINVAL;
>  }
> @@ -161,7 +161,7 @@ static int tps65219_ldo_volt2val(int idx, int uV)
>  	if (uV > max)
>  		return -EINVAL;
>  	else if (uV >= base)
> -		return (uV - TPS65219_LDO12_VOLT_MIN) / 50000;
> +		return (uV - TPS65219_LDO12_VOLT_MIN) / TPS65219_VOLT_STEP_50MV;
>  	else
>  		return -EINVAL;
>  }
> @@ -187,7 +187,7 @@ static int tps65219_ldo_val2volt(int idx, int val)
>  	else if (val <= reg_base)
>  		return base;
>  	else if (val >= 0)
> -		return TPS65219_LDO12_VOLT_MIN + (50000 * val);
> +		return TPS65219_LDO12_VOLT_MIN + (TPS65219_VOLT_STEP_50MV * val);
>  	else
>  		return -EINVAL;
>  }
> diff --git a/include/power/tps65219.h b/include/power/tps65219.h
> index aa81b92266fd..e8780af2d811 100644
> --- a/include/power/tps65219.h
> +++ b/include/power/tps65219.h
> @@ -17,10 +17,20 @@
>  #define TPS65219_BUCK_DRIVER		"tps65219_buck"
>
>  #define TPS65219_VOLT_MASK		0x3F
> -#define TPS65219_BUCK_VOLT_MAX		3400000
> -
>  #define TPS65219_ENABLE_CTRL_REG	0x2
>
> +#define TPS65219_VOLT_STEP_25MV		25000
> +#define TPS65219_VOLT_STEP_50MV		50000
> +#define TPS65219_VOLT_STEP_100MV	100000
> +
> +#define TPS65219_BUCK_0V6		600000
> +#define TPS65219_BUCK_1V4		1400000
> +#define TPS65219_BUCK_3V4		3400000
> +
> +#define TPS65219_BUCK_REG_0V6		0x00
> +#define TPS65219_BUCK_REG_1V4		0x20
> +#define TPS65219_BUCK_REG_3V4		0x34
> +
>  #define TPS65219_BUCK1_VOUT_REG		0xa
>  #define TPS65219_BUCK2_VOUT_REG		0x9
>  #define TPS65219_BUCK3_VOUT_REG		0x8
> --
> 2.34.1




  reply	other threads:[~2024-12-18 22:45 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-12-18 17:12 [PATCH v1 0/2] TPS65219 U-Boot Driver Clean-Up Shree Ramamoorthy
2024-12-18 17:12 ` [PATCH v1 1/2] power: regulator: replace printf() with pr_err() Shree Ramamoorthy
2024-12-18 22:44   ` Jaehoon Chung
2024-12-18 17:12 ` [PATCH v1 2/2] power: replace magic numbers with macros Shree Ramamoorthy
2024-12-18 22:44   ` Jaehoon Chung [this message]
2024-12-18 22:55     ` Shree Ramamoorthy
2024-12-18 23:26       ` Jaehoon Chung
2024-12-19 17:47         ` Shree Ramamoorthy
2024-12-20  2:04           ` Jaehoon Chung

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='01e401db519e$6d116220$47342660$@samsung.com' \
    --to=jh80.chung@samsung.com \
    --cc=m-leonard@ti.com \
    --cc=praneeth@ti.com \
    --cc=s-ramamoorthy@ti.com \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox