From: robdlg at att.net <robdlg@att.net>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] A3000 Linux restart
Date: Fri, 20 Feb 2004 14:18:51 +0000 [thread overview]
Message-ID: <022020041418.29546.1f5c@att.net> (raw)
I'm having a problem with U-Boot 1.0.2, built from the cvs tarball dated 12 Feb.
The target is the Artis SBC-A3000, based on the MPC8245.
U-Boot starts and runs fine, and can boot Linux successfully. However, if I issue
the command "shutdown -r now" under Linux, a problem with the serial port occurs
soon after U-Boot restarts: right after "I2C" is printed, gibberish appears on the
screen, as if the baud rate had suddenly changed.
The processor is evidently still running at this point, as "bootcmd" takes effect
and once the kernel re-initializes the UART, the serial port is back to normal.
This problem occurs only when restarting Linux--it does not happen when restarting
U-Boot or after pressing the reset button on the board. The customized version of
PPCBoot 1.1.5 that was provided with the board does not exhibit this behavior.
Is this an issue with U-Boot, or is there something in the Linux kernel (modified
MontaVista 2.4.19) that could be the cause?
reply other threads:[~2004-02-20 14:18 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=022020041418.29546.1f5c@att.net \
--to=robdlg@att.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox