[U-Boot-Users] u-boot and NIOS dk 1s10 board

[Stephan Linz <linz@mazet.de>]

Hi,

Am Dienstag, 18. November 2003 10:17 schrieb Patrice Kadionik:
> Hi Stephan and Scott;
> I agree with you: with NIOS  all hardware and software are configurable...
> u-boot should at least support the stander32 design. in fact this design
> is complete because it uses all the hardware ressource of the altera's
> board...I think u-boot must be based on this design. But we should make
> easily configurable the base address of all peripherals according to a
> specific user design.

Yes, great idea. It is a corollary of my planed hardware overview.

> I think it's the main reason that there's no uClinux port for NIOS

Hm, I don't think so. There is a NIOS port, but it was (and is) broken in 
current CVS tree. There is no passable way to rebuild for himself.

> because hardware is too configurable and to stuck to a particular

That's the second reason. It's really new for all known and conservative 
software modells to work with configurable hardware (CPU inclusive). With 
this knowlege in mind we have to make a more expansive configuration 
infrastructure. New ideas are welcome ...

br,
Stephan

> configration...
> Cheers and merci.
> Pat.
>
> Stephan Linz wrote:
> >--snipp--

-- 
Mit freundlichen Gruessen
Stephan Linz



======================================================================
Stephan Linz
Softwareentwicklung

MAZeT GmbH                   Email: mailto:linz at mazet.de
G?schwitzer Str. 32          Tel. : (3641) 2809-55
D-07745 Jena                 Fax  : (3641) 2809-12

Besuchen Sie bitte unsere Web-Seiten: http://www.MAZeT.de
======================================================================