From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 0/3] ARM: meson: Add G12A USB Support
Date: Tue, 7 May 2019 15:05:00 +0200 [thread overview]
Message-ID: <037a2b22-393a-7df6-9217-5ae797ef5179@denx.de> (raw)
In-Reply-To: <20190507084339.14723-1-narmstrong@baylibre.com>
On 5/7/19 10:43 AM, Neil Armstrong wrote:
> This patchset adds support for USB on Amlogic G12A SoCs.
>
> This patchset is composed with :
> - PHY Drivers
> - USB Control Glue driver
> - G12A board setup for Device mode
>
> Device Tree nodes will be added in a separate patchset when applied
> on a tagged Linux tree.
>
> The Amlogic G12A USB Complex is composed of :
> - 2 USB Controllers :
> * DWC3 for USB2 and USB3 Host functionality
> * DWC2 for USB2 Peripheral functionality
> - 2 USB2 OTG PHYs, only a single one will be routed to either DWC2 to DWC3
> - 1 USB3 PHY shared with PCIE funcionnality
> - A Glue to control PHY routing, setup and OTG detection
>
> The Glue configures the UTMI 8bit interfaces for the USB2 PHYs, including
> routing of the OTG PHY between the DWC3 and DWC2 controllers, and
> setups the on-chip OTG mode selection for this PHY.
>
> This drivers supports the on-probe setup of the OTG mode, and manually
> via a setup function in the G12A common board code.
>
> Changes since v2:
> - rebased on u-boot master
>
> Changes since v1:
> - switch printf() to debug() in patch 1
>
> Neil Armstrong (3):
> usb: dwc3: Add Meson G12A USB Glue
> phy: meson: add Amlogic G12A USB2 and USB3+PCIE PHY drivers
> mach-meson: g12a: add DWC2 peripheral mode support
>
> arch/arm/include/asm/arch-meson/usb.h | 12 +
> arch/arm/mach-meson/board-g12a.c | 126 +++++++
> drivers/phy/Kconfig | 8 +
> drivers/phy/Makefile | 1 +
> drivers/phy/meson-g12a-usb2.c | 216 ++++++++++++
> drivers/phy/meson-g12a-usb3-pcie.c | 345 +++++++++++++++++++
> drivers/usb/dwc3/Kconfig | 8 +
> drivers/usb/dwc3/Makefile | 1 +
> drivers/usb/dwc3/dwc3-meson-g12a.c | 456 ++++++++++++++++++++++++++
> 9 files changed, 1173 insertions(+)
> create mode 100644 arch/arm/include/asm/arch-meson/usb.h
> create mode 100644 drivers/phy/meson-g12a-usb2.c
> create mode 100644 drivers/phy/meson-g12a-usb3-pcie.c
> create mode 100644 drivers/usb/dwc3/dwc3-meson-g12a.c
>
Looks good to me, pick this via the meson tree please.
--
Best regards,
Marek Vasut
next prev parent reply other threads:[~2019-05-07 13:05 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-07 8:43 [U-Boot] [PATCH v3 0/3] ARM: meson: Add G12A USB Support Neil Armstrong
2019-05-07 8:43 ` [U-Boot] [PATCH v3 1/3] usb: dwc3: Add Meson G12A USB Glue Neil Armstrong
2019-05-07 8:43 ` [U-Boot] [PATCH v3 2/3] phy: meson: add Amlogic G12A USB2 and USB3+PCIE PHY drivers Neil Armstrong
2019-05-07 8:43 ` [U-Boot] [PATCH v3 3/3] mach-meson: g12a: add DWC2 peripheral mode support Neil Armstrong
2019-05-07 13:05 ` Marek Vasut [this message]
2019-05-07 15:11 ` [U-Boot] [PATCH v3 0/3] ARM: meson: Add G12A USB Support Neil Armstrong
2019-05-07 15:16 ` Marek Vasut
2019-05-07 15:54 ` Lukasz Majewski
2019-05-09 8:44 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=037a2b22-393a-7df6-9217-5ae797ef5179@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox