[U-Boot-Users] [PATCH 2/2] Add support for SBC8641D

[Joe Hamman <joe.hamman@embeddedspecialties.com>]

Hi Jon,

> -----Original Message-----
> From: Jon Loeliger [mailto:jdl at freescale.com]
> Sent: Friday, August 10, 2007 2:58 PM
> To: joe.hamman at embeddedspecialties.com
> Cc: u-boot-users
> Subject: Re: [PATCH 2/2] Add support for SBC8641D
> 
> On Thu, 2007-08-09 at 15:11, Joe Hamman wrote:
> > Add support for Wind River's SBC8641D reference board.
> >
> > Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
> 
> 
> Joe,
> 
> I have applied both of your SBC8641 patches to the -mpc86xx
> custodian tree now.  Note, however, that they have been applied
> on top of the PCI rework patches that happened a bit earlier
> in our tree.  As those patches have already been pulled upstream,
> we will need to do some minor re-work of your PCI initialization
> to make it work again.
> 
> Just to make some progress here, I have applied your patches,
> but have _disabled_ the PCI with an "#undef PCI" in the config
> file for now.  Doing this allows the board to build and MAKEALL
> to be happy.  We'll call this progress.

Sounds good.  PCI isn't a requirement for my customer, anyway.

> 
> Please take a look at the mpc8641hpcn.c file for how it now
> sets up and calls fsl_pci_init() instead of pci_mpc86xx_init().
> I hope this is pretty clear and workable for you.

Will I find the new PCI code in the testing tree?

> 
> When you have this working, I will apply it to the -mpc86xx
> custodian tree and request Wolfgang pull it!  To that end,
> please try to get that to me before the close of this merge
> window on the 17th.
> 

I'll get it in ASAP.

Best regards,
Joe