[U-Boot-Users] RE: u-boot on Memec P4/7-FG456 (w/ virtex II pro)?

[Frank Smith <smith@amirix.com>]

We used the full 16550 UART.  If you do, you have to keep in mind
that the UART registers start 0x1000 up from the UART's base address
as specified in your MHS file.  Also, you have to make sure you get
your register width right --  CFG_NS16550_REG_SIZE = 4.

-Frank.

On Tue, 22 Jul 2003, Shamile Khan wrote:

> Hi Frank,
> 
> We are trying to port u-boot to Memec P4/7-FG456 as well. What did you
> have to do to get the serial port working. Also did you get it to work
> with uart lite that ships with EDK or the full uart that has to be
> purchased separately.
> 
> Thanks,
> Shamile
> 
> 
> 
> 
> 
> -------------------------------------------------------
> This SF.net email is sponsored by: VM Ware
> With VMware you can run multiple operating systems on a single machine.
> WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the
> same time. Free trial click here: http://www.vmware.com/wl/offer/345/0
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>