From: Reinhard Meyer <r.meyer@emk-elektronik.de>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] flash memory access
Date: Sun, 2 Mar 2003 21:30:06 +0100 [thread overview]
Message-ID: <03a501c2e0fa$857469c0$6d4ba8c0@alb.sub.de> (raw)
In-Reply-To: 20030302115007.B13182@europa.queda.net
----- Original Message -----
From: "Paul McAvoy" <paulmcav@queda.net>
To: <u-boot-users@lists.sourceforge.net>
Sent: Sunday, March 02, 2003 8:50 PM
Subject: Re: [U-Boot-Users] flash memory access
> On Sun, Mar 02, 2003 at 08:38:07PM +0100, Reinhard Meyer wrote:
> > > I'm sorry. I am confused here.
> >
> > THAT seems obvious ;)
> >
> > > When I boot the board, I am told by the ROM boot monitor (as well as
specs
> > for
> > > the board) that there is 32MBytes of flash memory.
> >
> > Really BYTES or is that BITS??
>
> Bytes
>
> > > flash chip with 32Megs available. It is a Sharp LHF32K01.
> >
> > THAT Chip has 32 MegaBITS, aka 4 MegaBYTES
> >
> > So you either have EIGHT of them on that board, or you are still
confused
>
> There are 8 chips on the board.
Then you will have to figure out how they are arranged. It is likely that
they are arranged such that the FLASH is 32 Bits wide. So it could be two
banks of four chips in 8-Bit mode or 4 banks of two chips in 16-Bit mode.
That hugely affects how they will be programmed.
Why don't you give ALL the Information you have found out so far? This
messaging goes on for days, and every exchange seems to pull out some more
info out of your nose....
prev parent reply other threads:[~2003-03-02 20:30 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-03-01 19:42 [U-Boot-Users] flash memory access Paul McAvoy
2003-03-01 21:25 ` Paul McAvoy
2003-03-01 23:16 ` Wolfgang Denk
2003-03-02 1:12 ` Paul McAvoy
2003-03-02 6:49 ` Reinhard Meyer
2003-03-02 9:38 ` Wolfgang Denk
2003-03-02 18:45 ` Paul McAvoy
2003-03-02 19:38 ` Reinhard Meyer
2003-03-02 19:50 ` Paul McAvoy
2003-03-02 20:30 ` Reinhard Meyer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='03a501c2e0fa$857469c0$6d4ba8c0@alb.sub.de' \
--to=r.meyer@emk-elektronik.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox