From: "Jaehoon Chung" <jh80.chung@samsung.com>
To: "'Martyn Welch'" <martyn.welch@collabora.com>,
<uboot-imx@nxp.com>, <sbabic@denx.de>
Cc: "'Martyn Welch'" <martyn.welch@collabora.co.uk>,
"'Simon Glass'" <sjg@chromium.org>, <u-boot@lists.denx.de>
Subject: RE: [PATCH v5 4/5] drivers: power: pmic: Enable use of rn5t567 PMIC in SPL
Date: Tue, 25 Oct 2022 19:25:52 +0900 [thread overview]
Message-ID: <045d01d8e85c$28d9fe80$7a8dfb80$@samsung.com> (raw)
In-Reply-To: <20221025095503.1254110-4-martyn.welch@collabora.com>
> -----Original Message-----
> From: Martyn Welch [mailto:martyn.welch@collabora.com]
> Sent: Tuesday, October 25, 2022 6:55 PM
> To: uboot-imx@nxp.com; sbabic@denx.de; Jaehoon Chung <jh80.chung@samsung.com>
> Cc: Martyn Welch <martyn.welch@collabora.co.uk>; Simon Glass <sjg@chromium.org>; u-
> boot@lists.denx.de
> Subject: [PATCH v5 4/5] drivers: power: pmic: Enable use of rn5t567 PMIC in SPL
>
> From: Martyn Welch <martyn.welch@collabora.co.uk>
>
> The support added later in this series tweaks the PMIC voltages in the
> SPL. Enable support for the rn5t567 in SPL builds to allow this to be done
> cleanly.
>
> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
> Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Best Regards,
Jaehoon Chung
> ---
>
> Changes in v3:
> - New patch (replaces addition of legacy support for rn5t567)
>
> Changes in v4:
> - None
>
> Changes in v5:
> - Rebase to current master branch
>
> drivers/power/pmic/Kconfig | 8 ++++++++
> drivers/power/pmic/Makefile | 2 +-
> 2 files changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
> index 0478f2aa1d..628d3a94bc 100644
> --- a/drivers/power/pmic/Kconfig
> +++ b/drivers/power/pmic/Kconfig
> @@ -300,6 +300,14 @@ config PMIC_RN5T567
> regulators Real-Time Clock and 4 GPIOs. This driver provides
> register access only.
>
> +config SPL_PMIC_RN5T567
> + bool "Enable driver for Ricoh RN5T567 PMIC in SPL"
> + depends on SPL_DM_PMIC
> + ---help---
> + The RN5T567 is a PMIC with 4 step-down DC/DC converters, 5 LDO
> + regulators Real-Time Clock and 4 GPIOs. This driver provides
> + register access only.
> +
> config PMIC_TPS65090
> bool "Enable driver for Texas Instruments TPS65090 PMIC"
> ---help---
> diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
> index e1d3545490..58c6507c58 100644
> --- a/drivers/power/pmic/Makefile
> +++ b/drivers/power/pmic/Makefile
> @@ -22,7 +22,7 @@ obj-$(CONFIG_$(SPL_)PMIC_AXP) += axp.o
> obj-$(CONFIG_PMIC_MAX8997) += max8997.o
> obj-$(CONFIG_PMIC_QCOM) += pmic_qcom.o
> obj-$(CONFIG_$(SPL_TPL_)PMIC_RK8XX) += rk8xx.o
> -obj-$(CONFIG_PMIC_RN5T567) += rn5t567.o
> +obj-$(CONFIG_$(SPL_)PMIC_RN5T567) += rn5t567.o
> obj-$(CONFIG_PMIC_TPS65090) += tps65090.o
> obj-$(CONFIG_PMIC_S5M8767) += s5m8767.o
> obj-$(CONFIG_DM_PMIC_TPS65910) += pmic_tps65910_dm.o
> --
> 2.35.1
next prev parent reply other threads:[~2022-10-25 10:26 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-25 9:54 [PATCH v5 1/5] imx8m: USDHC3 base address definition for i.MX8MP Martyn Welch
2022-10-25 9:54 ` [PATCH v5 2/5] ARM: imx: imx8mp: Enable support for i2c5 and i2c6 on i.MX8MP Martyn Welch
2022-10-26 13:00 ` Peng Fan
2022-11-08 16:38 ` sbabic
2022-10-25 9:55 ` [PATCH v5 3/5] drivers: power: pmic: Add support for rn5t568 PMIC Martyn Welch
2022-10-25 9:59 ` Jaehoon Chung
2022-11-08 16:39 ` sbabic
2022-10-25 9:55 ` [PATCH v5 4/5] drivers: power: pmic: Enable use of rn5t567 PMIC in SPL Martyn Welch
2022-10-25 10:25 ` Jaehoon Chung [this message]
2022-11-08 16:39 ` sbabic
2022-10-25 9:55 ` [PATCH v5 5/5] arm: imx8mp: Initial MSC SM2S iMX8MP support Martyn Welch
2022-11-08 16:49 ` sbabic
2022-11-08 16:37 ` [PATCH v5 1/5] imx8m: USDHC3 base address definition for i.MX8MP sbabic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='045d01d8e85c$28d9fe80$7a8dfb80$@samsung.com' \
--to=jh80.chung@samsung.com \
--cc=martyn.welch@collabora.co.uk \
--cc=martyn.welch@collabora.com \
--cc=sbabic@denx.de \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
--cc=uboot-imx@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox