From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Simek Date: Mon, 1 Jan 2007 21:32:01 +0100 Subject: [U-Boot-Users] u-boot port for MicroBlaze References: <406A31B117F2734987636D6CCC93EE3CB8A579@ehost011-3.exch011.intermedia.net> Message-ID: <056601c72de3$e4e641f0$0b00a8c0@monstrone> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, yes. Now, U-BOOT supports the Suzaku development board from AtmarkTechno. And I ported U-BOOT to the ML401 and the XUPV2P but Wolfgang didn't accept my patch because I had some problems with indentations. If you want to port U-BOOT to your board, you can download my development version of U-BOOT from my page - section download- U-BOOT. (www.monstr.eu ) Michal Simek ----- Original Message ----- From: "Leonid" To: Sent: Wednesday, December 27, 2006 4:31 AM Subject: [U-Boot-Users] u-boot port for MicroBlaze > Does MicroBlaze u-boot port actually work on any Xilinx board? Which > one? From Xilinx boards I only saw ML300 on u-boot tree and that one is > PPC405 based. > > I am bringing up uClinux on Spartan-2e based custom board (similar to > ML401) need bootloader and would appreciate any information how to port > u-boot there. > > Thanks, > > Leonid. > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share > your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.5.432 / Virus Database: 268.16.2/613 - Release Date: 1.1.2007 > 14:50 > >