From: Ulf Samuelsson <ulf@atmel.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] AT91SAM7 port of U-boot?
Date: Fri, 7 Mar 2008 01:20:12 +0100 [thread overview]
Message-ID: <059101c87fee$fe1d82b0$030514ac@atmel.com> (raw)
In-Reply-To: a04f56da0803060943s6078ce9aw665cfa415de8bff4@mail.gmail.com
> Hello,
>
> Has anyone made any attempt to port any CPUs in the AT91SAM7 series to
> u-boot?
> I looked in the archives and did a general search on the web
> but didn't come across anything. If not, does anyone foresee any
> problems with u-boot running on these CPUs? Specifically I'm looking
> at the AT91SAM7SE512 which has 512K internal flash. It only has 32K
> internal SRAM, but I'll have plenty of SDRAM available.
>
Have you checked out the new AT91SAM9XE512?
Basically the same chip as the AT91SAM9260 and has 512 kB flash
and 32 kB SRAM. Only big difference is that the SAM9XE has
2 x TWI instead of one, and only 6 serial ports instead of 7.
I think it would be much easier to get U-boot running on the SAM9XE.
It also has an Ethernet controller so you can do fast downloads.
Also, it runs at 200 MHz instead of the ~50 MHz of the SAM7SE.
> --
Best Regards
Ulf Samuelsson
next prev parent reply other threads:[~2008-03-07 0:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-06 17:43 [U-Boot-Users] AT91SAM7 port of U-boot? Zachary P. Landau
2008-03-07 0:20 ` Ulf Samuelsson [this message]
2008-03-07 20:59 ` Zachary P. Landau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='059101c87fee$fe1d82b0$030514ac@atmel.com' \
--to=ulf@atmel.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox