From mboxrd@z Thu Jan  1 00:00:00 1970
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Tue, 29 Jun 2010 15:59:31 +0530
Subject: [U-Boot] Supporting two boards which are almost similar
In-Reply-To: <042f01cb1456$ffa4e250$feeea6f0$@raj@ti.com>
References: <042f01cb1456$ffa4e250$feeea6f0$@raj@ti.com>
Message-ID: <06aa01cb1775$f63b3940$e2b1abc0$@raj@ti.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi,

On Fri, Jun 25, 2010 at 16:40:19, Sudhakar Rajashekhara wrote:
> Hi,
> 
> Spectrum digital has two versions of DM6467 EVM, DM6467 and DM6467T.
> Though there are some video related differences between these two boards,
> from U-Boot perspective the only difference the developer need to worry
> is the different oscillator frequency. DM6467 has 27MHz crystal but
> DM6467T has 33MHz crystal. Both these EVMs are registered as two different
> boards in mach-types.h. Existing U-Boot has support DM6467 EVM which has
> 27MHz crystal. How should I go about adding support for DM6467T EVM which
> has 33MHz crystal? Do I need to add a new configuration file for this or
> can I make use of the existing configuration file in any way?
> 
> One method I was aware of was, using some scripting from the top level
> Makefile but I believe this is not recommended.
> 

Any other method of achieving this?

Regards,
Sudhakar