[U-Boot-Users] Microblaze: PULL request

[Michal Simek <monstr@seznam.cz>]

Hi Grant,

I thought please pull these changes to u-boot testing branch not to 
mainline.

> I don't think I've seen any of these changes posted on the list for
> review.  They need to be reviewed before being merged into mainline.
> Especially considering that some of the changes touch common code (not
> just microblaze).

These files were send in ROMFS patch 23.June 07
>>  common/cmd_jffs2.c                |   52 ++++--
>>  fs/Makefile                       |    2 +-
>>  fs/romfs/Makefile                 |   49 +++++
>>  fs/romfs/romfs.c                  |  270 ++++++++++++++++++++++++++

New files for supporting EMAC and EMACLITE interface. Old support files are 
in repository too.
I want to remove xilinx large files from U-Boot source tree. Emac driver use 
PPC405 core too (ml300 board).
I tested it for Microblaze CPU and you can test it for PPC405 and give me a 
respond.
We were talking about at the end of March.
>>  Makefile                          |    9 +-
>>  drivers/net/Makefile              |   45 +++++
>>  drivers/net/xilinx_emac.c         |  372 
>> ++++++++++++++++++++++++++++++++++++
>>  drivers/net/xilinx_emac.h         |  128 +++++++++++++
>>  drivers/net/xilinx_emaclite.c     |  378 
>> +++++++++++++++++++++++++++++++++++++

Little name changes - because xuartlite serial interface isn't only one 
which can be use with Microblaze CPU.
I think that can be helpful for PPC405 embedded core too that can use 
uartlite serial interface.
>>  drivers/serial_xuartlite.c        |    2 +-

cmd_mfsl consist of only Microblaze dependent commands.
>>  common/cmd_mfsl.c                 |   11 +-

 Microblaze dependent files
>>  cpu/microblaze/cache.c            |    2 +-
>>  cpu/microblaze/start.S            |    6 +-
>>  cpu/microblaze/timer.c            |    7 +
>>  lib_microblaze/time.c             |    8 +
>>  board/xilinx/xupv2p/Makefile      |   21 +--
>>  board/xilinx/xupv2p/config.mk     |    6 +-
>>  board/xilinx/xupv2p/xparameters.h |   27 ++--
>>  include/configs/ml401.h           |    1 +
>>  include/configs/suzaku.h          |    3 +
>>  include/configs/xupv2p.h          |   58 +++++-

Best regards,
Michal Simek