* [U-Boot-Users] Re: How can I save env values to NAND FLASH
@ 2003-11-28 1:02 최광일
0 siblings, 0 replies; 2+ messages in thread
From: 최광일 @ 2003-11-28 1:02 UTC (permalink / raw)
To: u-boot
I 'm very Sorry about confusing you.
but I returned mail which I sent yesterday by my mail server so I send again.
sorry for this again and again
------- ?? ??? -------
???? : Wolfgang Denk <wd@denx.de>
? ? : 2003? 11? 28? 08? 57?
? ? : [U-Boot-Users] Re: How can I save env values to NAND FLASH
Hi,
in message <0HP10078XB52UU@ms12.samsung.com> you wrote:
>
...
> How Can I save environment values to NAND FLASH?
You posted exactly the same message less than 24 hours ago. Please do
NOT repost just because you don't receive replies.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
A modem is a baudy house.
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive? Does it
help you create better code? SHARE THE LOVE, and help us help
YOU! Click Here: http://sourceforge.net/donate/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot-Users] How can I save env values to NAND FLASH
@ 2003-11-27 23:41 최광일
2003-11-27 23:57 ` [U-Boot-Users] " Wolfgang Denk
0 siblings, 1 reply; 2+ messages in thread
From: 최광일 @ 2003-11-27 23:41 UTC (permalink / raw)
To: u-boot
Dear All
Das U-Boot uses NOR FLASH for saving environment values
for example IPADDR,GATEWAY and so on.
I have a board with only NAND FLASH (SAMSUNG NAND FLASH 64M) without NOR FLASH
and when I entered saveenv command to save environment values to NAND FLASH in U-Boot
Some message returned and my values are not saved into NAND
======= Message ================
SMDK2410 # saveenv
Saving Environment to Flash...
Un-Protected 1 sectors Erasing Flash...Erasing sector 18 ... ok.
Erased 1 sectors Writing to Flash... Flash not Erased Protected 1 sectors
===== End of Message ===========
How Can I save environment values to NAND FLASH?
Best regards
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot-Users] Re: How can I save env values to NAND FLASH
2003-11-27 23:41 [U-Boot-Users] " 최광일
@ 2003-11-27 23:57 ` Wolfgang Denk
0 siblings, 0 replies; 2+ messages in thread
From: Wolfgang Denk @ 2003-11-27 23:57 UTC (permalink / raw)
To: u-boot
Hi,
in message <0HP10078XB52UU@ms12.samsung.com> you wrote:
>
...
> How Can I save environment values to NAND FLASH?
You posted exactly the same message less than 24 hours ago. Please do
NOT repost just because you don't receive replies.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
A modem is a baudy house.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-11-28 1:02 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-11-28 1:02 [U-Boot-Users] Re: How can I save env values to NAND FLASH 최광일
-- strict thread matches above, loose matches on Subject: below --
2003-11-27 23:41 [U-Boot-Users] " 최광일
2003-11-27 23:57 ` [U-Boot-Users] " Wolfgang Denk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox