From: 최광일 <choigi@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] How can I save env values to NAND FLASH
Date: Fri, 28 Nov 2003 08:41:22 +0900 [thread overview]
Message-ID: <0HP10078XB52UU@ms12.samsung.com> (raw)
Dear All
Das U-Boot uses NOR FLASH for saving environment values
for example IPADDR,GATEWAY and so on.
I have a board with only NAND FLASH (SAMSUNG NAND FLASH 64M) without NOR FLASH
and when I entered saveenv command to save environment values to NAND FLASH in U-Boot
Some message returned and my values are not saved into NAND
======= Message ================
SMDK2410 # saveenv
Saving Environment to Flash...
Un-Protected 1 sectors Erasing Flash...Erasing sector 18 ... ok.
Erased 1 sectors Writing to Flash... Flash not Erased Protected 1 sectors
===== End of Message ===========
How Can I save environment values to NAND FLASH?
Best regards
next reply other threads:[~2003-11-27 23:41 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-27 23:41 최광일 [this message]
2003-11-27 23:57 ` [U-Boot-Users] Re: How can I save env values to NAND FLASH Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2003-11-25 15:43 [U-Boot-Users] U-Boot code checksum? Wolfgang Denk
2003-11-27 3:12 ` [U-Boot-Users] How can I save env values to NAND FLASH 최광일
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0HP10078XB52UU@ms12.samsung.com \
--to=choigi@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox