* Bootcmd/key1/key2
@ 2021-08-23 12:50 Tim
0 siblings, 0 replies; only message in thread
From: Tim @ 2021-08-23 12:50 UTC (permalink / raw)
To: u-boot
Hi,
I have my custom board successfully booting using my bootcmd environment
variable.
I would like to have alternate boots from user keys (derived from an I2C
device if that's relevant) but if I set a key1 environment variable it is
not executed in place of the saved bootcmd. The user guide says it should be
(section 5.4.2 "User keys") but I have had zero success; I have searched
every single file in the repo for "key1" and nothing helps (only reference
is an env_set key1="on" - or "off" - for one board).
What black magic is needed to get the alternate boot(s) to work , please?
Tim.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2021-08-23 12:51 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-08-23 12:50 Bootcmd/key1/key2 Tim
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox