From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tor Krill Date: Mon, 23 Jun 2008 12:27:17 +0200 (CEST) Subject: [U-Boot-Users] broken changes @ MPC83xx In-Reply-To: <485F79BD.1030206@matrix-vision.de> Message-ID: <0rL7iSht.1214216836.6497170.tor@localhost> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Andre, I had a similar problem a while back. Adding the new define: #define CONFIG_HIGH_BATS 1 /* High BATs supported */ To my config solved the problem. /Tor On 6/23/2008, "Andre Schwarz" wrote: >Kim, > >after being back from holiday and pulling the lates u-boot today >(v1.3.3) my MPC8343 based board (mvBL-M7) doesn't work any longer. >Not a single character is put out on serial - yet build is not >complaining about anything and System.map looks quite normal. > >Any ideas what commit can cause this ? > >Am I missing any #defines introduced lately ? > > >regards, >Andre > >MATRIX VISION GmbH, Talstra?e 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 >Gesch?ftsf?hrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner > >------------------------------------------------------------------------- >Check out the new SourceForge.net Marketplace. >It's the best place to buy or sell services for >just about anything Open Source. >http://sourceforge.net/services/buy/index.php >_______________________________________________ >U-Boot-Users mailing list >U-Boot-Users at lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/u-boot-users >