From mboxrd@z Thu Jan 1 00:00:00 1970 From: Baz0unga Date: Thu, 3 May 2007 09:55:58 -0700 (PDT) Subject: [U-Boot-Users] Failed to run "hello world" 1.1.6 example on AT91RM9200EK Message-ID: <10308910.post@talk.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de hi, >From Denx, i have downloaded and installed eldk properly. I have downloaded u-boot 1.1.6 and proceeded as follow : - make at91rm9200dk_config - make all the compilation process does not lead to any error. i have all the executable files in /examples. Unfortunately, when i try to load and run the "hello world" executable on the board, it leads to nothing. i ve tried to load it at 40000 and execute it at 40004 as said in the doc, i ve also tried to load it at 20000000 and start it at 20000000 and 20000004 but nothing works. I ve also tried to load u-boot 1.1.6 image on the board following the instructions given in tha flash programming AN but nothing happens ("decompressing image" is displayed and nothing else) Only the 1.1.1 provided on ATMEL CD can be loaded properly. Any idea ? Baz. -- View this message in context: http://www.nabble.com/Failed-to-run-%22hello-world%22-1.1.6-example-on-AT91RM9200EK-tf3687666.html#a10308910 Sent from the Uboot - Users mailing list archive at Nabble.com.