From: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v8 29/31] arm1176: Remove unused MMU setup from start.S
Date: Fri, 1 Mar 2013 16:23:28 +0100 (CET) [thread overview]
Message-ID: <1072274020.214510.1362151408454.JavaMail.root@advansee.com> (raw)
In-Reply-To: <20130301162525.2977128b@lilith>
Hi Albert,
On Friday, March 1, 2013 4:25:25 PM, Albert ARIBAUD wrote:
> Hi Beno?t,
>
> On Fri, 1 Mar 2013 13:10:38 +0100, Beno?t Th?baudeau
> <benoit.thebaudeau@advansee.com> wrote:
>
> > Following the removal of the smdk6400 board, the MMU setup code in
> > arm1176/start.S becomes unused, so move it to scrapyard. It will still be
> > possible to restore it later from the Git history if necessary, in which
> > case it
> > should be moved out from the relocate_code() function.
>
> Avoid using "scrapyard" here, as 'scrapyard' is already being used for
> whole board support removal (see doc/README.scrapyard), and this patch
> is not about board support removal.
OK, then I suppose that the same applies to 27/31.
I will reword in v9.
Best regards,
Beno?t
next prev parent reply other threads:[~2013-03-01 15:23 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-01 12:10 [U-Boot] [PATCH v8 01/31] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 02/31] mtd: nand: mxc_nand: Fix is_16bit_nand() Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 03/31] nand: mxc: Prepare to add support for i.MX5 Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 04/31] nand: mxc: Add " Benoît Thébaudeau
2013-03-01 15:33 ` Fabio Estevam
2013-03-01 15:30 ` Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 05/31] imx: mx5: lowlevel_init: Simplify code Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 06/31] imx: mx53ard: Add support for NAND Flash Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 07/31] nand: mxc: Fix debug trace in mxc_nand_read_oob_syndrome() Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 08/31] nand: mxc: Use appropriate page number in syndrome functions Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 09/31] arm: start.S: Fix _TEXT_BASE for SPL Benoît Thébaudeau
2013-03-01 21:17 ` Tom Rini
2013-03-01 12:10 ` [U-Boot] [PATCH v8 10/31] arm: relocate_code() is no longer noreturn Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 11/31] arm1136: Remove redundant relocate_code() return Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 12/31] arm: relocate_code(): Remove useless relocation offset computation Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 13/31] arm: relocate_code(): Use __image_copy_end for end of relocation Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 14/31] arm: crt0.S: Remove bogus .globl Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 15/31] autoconfig.mk: Make it possible to define configs from other configs Benoît Thébaudeau
2013-03-01 21:20 ` Tom Rini
2013-03-01 21:30 ` Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 16/31] Makefile: Change CONFIG_SPL_PAD_TO to image offset Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 17/31] imx: Fix automatic make targets for imx images Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 18/31] nand: mxc: Switch NAND SPL to generic SPL Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 19/31] arm926ejs: Remove deprecated and now unused NAND SPL Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 20/31] arm: Remove unused relocate_code() parameters Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 21/31] Makefile: Move SHELL setup to config.mk Benoît Thébaudeau
2013-03-01 21:26 ` Tom Rini
2013-03-01 12:10 ` [U-Boot] [PATCH v8 22/31] .gitignore: Add /SPL Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 23/31] imx: Add u-boot-with-spl.imx make target Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 24/31] imx: Add u-boot-with-nand-spl.imx " Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 25/31] arm: Remove support for smdk6400 Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 26/31] Revert "mkconfig: start deprecating Makefile config targets" Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 27/31] arm: Remove support for unused s3c64xx Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 28/31] arm: Remove deprecated and now unused NAND SPL Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 29/31] arm1176: Remove unused MMU setup from start.S Benoît Thébaudeau
2013-03-01 15:25 ` Albert ARIBAUD
2013-03-01 15:23 ` Benoît Thébaudeau [this message]
2013-03-01 12:10 ` [U-Boot] [PATCH v8 30/31] arm: Make all linker scripts compatible with per-symbol sections Benoît Thébaudeau
2013-03-01 12:10 ` [U-Boot] [PATCH v8 31/31] arm: Remove duplicated start.S code Benoît Thébaudeau
2013-03-01 15:46 ` Albert ARIBAUD
2013-03-01 15:50 ` Benoît Thébaudeau
2013-03-01 16:33 ` Benoît Thébaudeau
2013-03-01 21:56 ` Albert ARIBAUD
2013-03-01 22:02 ` Albert ARIBAUD
2013-03-01 22:54 ` Benoît Thébaudeau
2013-03-02 0:22 ` Simon Glass
2013-03-02 1:10 ` Benoît Thébaudeau
2013-03-02 6:45 ` Albert ARIBAUD
2013-03-02 13:42 ` Benoît Thébaudeau
2013-03-03 8:14 ` Albert ARIBAUD
2013-03-01 15:33 ` [U-Boot] [PATCH v8 01/31] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT Benoît Thébaudeau
2013-03-01 15:39 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1072274020.214510.1362151408454.JavaMail.root@advansee.com \
--to=benoit.thebaudeau@advansee.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox