[U-Boot-Users] OCOTEA configuration of active ethernet port

[U-Boot-Users] OCOTEA configuration of active ethernet port

[Daren Hayward]

I don't know if anyone else has the same in the include/configs/OCOTEA.h,
but I had to set the #define CONFIG_ETHADDR2 to #define CONFIG_ETH2ADDR to
get the ethernet port to come up, it was the recognised as ethprime

-----Original Message-----
From: Daren Hayward 
Sent: 19 May 2004 17:56
To: U-Boot User List
Subject: [U-Boot-Users] OCOTEA configuration of active ethernet port


Hi,

I am trying to use ppc_440x_eth2 (GigE port), I have setenv ethact
ppc_440x_eth2 and ethprime to the same but the only port that seems to work
is eth0, any guidance would be appreciated

Cheers

Daren


-------------------------------------------------------
This SF.Net email is sponsored by: SourceForge.net Broadband
Sign-up now for SourceForge Broadband and get the fastest
6.0/768 connection for only $19.95/mo for the first 3 months!
http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

[U-Boot-Users] OCOTEA configuration of active ethernet port

[Wolfgang Denk]

In message <C18BA5DDB58DD511BD0700C0DF0DD450294174@NTSERVER4> you wrote:
> I don't know if anyone else has the same in the include/configs/OCOTEA.h,
> but I had to set the #define CONFIG_ETHADDR2 to #define CONFIG_ETH2ADDR to
> get the ethernet port to come up, it was the recognised as ethprime

Thanks for pointing out; will fix this ASAP in CVS.


Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
I still miss my ex-wife, but my aim is getting better.

[U-Boot-Users] OCOTEA configuration of active ethernet port

[Travis Sawyer]

On Fri, 2004-05-21 at 07:56, Daren Hayward wrote:
> I don't know if anyone else has the same in the include/configs/OCOTEA.h,
> but I had to set the #define CONFIG_ETHADDR2 to #define CONFIG_ETH2ADDR to
> get the ethernet port to come up, it was the recognised as ethprime
> 
Daren:

That is really odd.  As I mentioned before, all I need do is set ethaddr
and eth1addr to null in the environment and the gige ports work.


In fact, that is how I have my board currently setup, so I can test the
cis8201 phy's and changes due to errata.

Regards,

Travis

> -----Original Message-----
> From: Daren Hayward 
> Sent: 19 May 2004 17:56
> To: U-Boot User List
> Subject: [U-Boot-Users] OCOTEA configuration of active ethernet port
> 
> 
> Hi,
> 
> I am trying to use ppc_440x_eth2 (GigE port), I have setenv ethact
> ppc_440x_eth2 and ethprime to the same but the only port that seems to work
> is eth0, any guidance would be appreciated
> 
> Cheers
> 
> Daren
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by: SourceForge.net Broadband
> Sign-up now for SourceForge Broadband and get the fastest
> 6.0/768 connection for only $19.95/mo for the first 3 months!
> http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by: Oracle 10g
> Get certified on the hottest thing ever to hit the market... Oracle 10g. 
> Take an Oracle 10g class now, and we'll give you the exam FREE.
> http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users

[U-Boot-Users] OCOTEA configuration of active ethernet port

[Daren Hayward]

Hi,

I am trying to use ppc_440x_eth2 (GigE port), I have setenv ethact
ppc_440x_eth2 and ethprime to the same but the only port that seems to work
is eth0, any guidance would be appreciated

Cheers

Daren