From: Leif Lindholm <leif.lindholm@i3micro.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] AMD dbau1550
Date: Mon, 24 May 2004 17:22:31 +0200 [thread overview]
Message-ID: <1085412151.21246.50.camel@fortress> (raw)
Hi
I've been working on getting u-boot 1.1.1 up and running on <subject>,
in little endian mode (which someone asked for a few days ago I
believe).
I've been able to get as far as "Starting kernel ..." after downloading
the kernel u-boot image through tftp.
I know this tecnically means u-boot is finished, however the same kernel
(in srec format) boots fine from the original yamon loader on the board.
When I halt the processor through jtag (bdi2000), the PC is always at
0xbfc00424 (somewhere in ROM exception land?).
The loaded image has been configured using
tools/mkimage -C gzip -a 0x80100000 -e 0x80246040 -A mips -O linux -T kernel -d vmlinux.gz vmlinux.u-boot
0x80246040 is the location of "kernel_entry".
Does anyone have any hints about how I could work my way past this problem?
regards
/
Leif
next reply other threads:[~2004-05-24 15:22 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-05-24 15:22 Leif Lindholm [this message]
2004-05-24 17:22 ` [U-Boot-Users] AMD dbau1550 Dan Malek
2004-05-24 19:53 ` Thomas Lange
2004-05-25 18:29 ` [U-Boot-Users] AMD dbau1550 (resolved) Leif Lindholm
2004-05-25 19:27 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1085412151.21246.50.camel@fortress \
--to=leif.lindholm@i3micro.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox