From mboxrd@z Thu Jan  1 00:00:00 1970
From: Rune Torgersen <runet@innovsys.com>
Date: Mon, 19 Jul 2004 10:56:28 -0500
Subject: [U-Boot-Users] PQ2FADS-VR 2nd Ethernet
In-Reply-To: <92B7B15A1C9E564B94BEE09BA4E1E2A603FC3C@aae-exchange.aaesys.com>
References: <92B7B15A1C9E564B94BEE09BA4E1E2A603FC3C@aae-exchange.aaesys.com>
Message-ID: <1090252587.10776.2.camel@runet>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Mon, 2004-07-19 at 10:03, Jihua Cheng wrote:
> Where do I need to check?

The TX error message is very typical if there is no TX clock from the
phy to the FCC.
* Check your TC clock
* if that is OK, Check the Port settings for the  RX and TX clock
* Check the software settings, make sure they use the right clocks.