From: reckless <recklinux@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] PCI OHCI / testing-USB branch
Date: Thu, 7 Jun 2007 11:31:58 -0700 (PDT) [thread overview]
Message-ID: <11013739.post@talk.nabble.com> (raw)
In-Reply-To: <87lklxch1f.fsf@denx.de>
Hi
I am stuck at the position where iam not getting any data on USB bus. I am
using the ISP1562 chip on my PCI and using the OHCI code. I am able to reset
and initialize the controller as i am able to see the reset signal and High
speed chirp signal on the bus but there is no data on the bus. It shows the
invalid packet on with all 0xFF at the first time i connect the mass storage
device and running the usb reset command what could be the problem ?
How i have to map the PCI memory ?
I though that it could be the invalid memory access as i am taking the gohci
and hcca structure by just taking it as an array and the controller HcHcca
registers are unable to access that location it 0x7ffa0000 in my case where
my PCI memory is mapped at 0x80000000
Need some help
Regards
Markus Klotzb?cher-2 wrote:
>
> Dear Matthias,
>
> Matthias Fuchs <matthias.fuchs@esd-electronics.com> writes:
>
>> is someone currently working on the testing-USB branch? Does it contain
>> the most up to date USB code?
>
> Yes, and no. I've got a couple of patches for the generic OHCI driver
> which have not been merged yet, because I want to do some more
> testing. I'll try to do this soon.
>
>> I have to add support for a PCI OHCI controller on a 405 board. This will
>> result in some modifications (endianess + bus offsets) of
>> drivers/usb_ohci.c.
>
> Ok.
>
>> Is someone else using a PCI OHCI controller on a board that I might have
>> missed to check?
>
> Not that I know of.
>
>
> Regards
>
> Markus Klotzbuecher
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share
> your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>
>
--
View this message in context: http://www.nabble.com/PCI-OHCI---testing-USB-branch-tf2710846.html#a11013739
Sent from the Uboot - Users mailing list archive at Nabble.com.
prev parent reply other threads:[~2007-06-07 18:31 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-27 10:04 [U-Boot-Users] PCI OHCI / testing-USB branch Matthias Fuchs
2006-11-27 10:36 ` Markus Klotzbücher
2006-11-28 11:31 ` Robert Delien
2006-11-28 13:24 ` Markus Klotzbücher
2006-11-29 19:16 ` Matthias Fuchs
2006-11-29 19:51 ` Markus Klotzbücher
2007-06-07 18:31 ` reckless [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11013739.post@talk.nabble.com \
--to=recklinux@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox