* [U-Boot-Users] u-boot PCMCIA Support w/ PXA-255??
@ 2004-12-14 7:41 Craig A. Vanderborgh
2004-12-14 8:03 ` Christian Pell
0 siblings, 1 reply; 4+ messages in thread
From: Craig A. Vanderborgh @ 2004-12-14 7:41 UTC (permalink / raw)
To: u-boot
Hello All:
I have managed to get u-boot running on my PXA255/SA1111-based board.
Our board seems to be pretty close to the Intel "Lubbock" reference
design, so I was able to get a slightly modified Lubbock u-boot
configuration to work on this board.
Now, what I REALLY need is to get PCMCIA working w/u-boot and this
board. Specifically, I need to be able to use dhcp/tftp from u-boot to
download images to configure the board in the field. Initially, I need
ne2000 support, but later on I'll have to have 802.11b card support.
It appears that I need some sample source that illustrates how to bring
up PCMCIA on the PXA255/SA1111. I have not been able to find a good
example of this so far, and I am hoping (praying??) that someone out in
u-boot-land or DENX-land has already done some work to get
PCMCIA working in u-boot. I have the Linux PCMCIA sources (for
PXA/SA1111) and I *might* be able to adapt them, but they aren't working
yet and it seems like working on the simpler case (u-boot standalone
PCMCIA) might be a better place to get a foothold.
ANY ideas you may have or pointers to other documentation would be
appreciated. I am struggling because PCMCIA support seems to be pretty
thin in the various bootloaders - u-boot included.
Thanks in advance,
craig vanderborgh
voxware incorporated
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot-Users] u-boot PCMCIA Support w/ PXA-255??
2004-12-14 7:41 [U-Boot-Users] u-boot PCMCIA Support w/ PXA-255?? Craig A. Vanderborgh
@ 2004-12-14 8:03 ` Christian Pell
2004-12-14 8:15 ` Craig A. Vanderborgh
0 siblings, 1 reply; 4+ messages in thread
From: Christian Pell @ 2004-12-14 8:03 UTC (permalink / raw)
To: u-boot
On Tue, 2004-12-14 at 02:41 -0500, Craig A. Vanderborgh wrote:
> Now, what I REALLY need is to get PCMCIA working w/u-boot and this
> board. Specifically, I need to be able to use dhcp/tftp from u-boot to
> download images to configure the board in the field. Initially, I need
> ne2000 support, but later on I'll have to have 802.11b card support.
>
> It appears that I need some sample source that illustrates how to bring
> up PCMCIA on the PXA255/SA1111. I have not been able to find a good
> example of this so far, and I am hoping (praying??) that someone out in
Hi,
I submitted a patch for NE2000 support on PXA/PCMCIA, really don't know
why it didn't go into the trunk. Anyway take a look:
http://sourceforge.net/mailarchive/message.php?msg_id=9617953
I've tested it with a couple of different NE2000 cards (Belkin, Pretec),
I would like to hear any more feedbacks. Please note that 802.11b are
much worse beasts and they come with licensing problems too since
usually you have to download some firmware and such.
Bye,
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot-Users] u-boot PCMCIA Support w/ PXA-255??
2004-12-14 8:03 ` Christian Pell
@ 2004-12-14 8:15 ` Craig A. Vanderborgh
2004-12-14 8:21 ` Christian Pell
0 siblings, 1 reply; 4+ messages in thread
From: Craig A. Vanderborgh @ 2004-12-14 8:15 UTC (permalink / raw)
To: u-boot
Christian:
I would love to try this out. Please send me the tarball you mentioned,
or provide a
pointer to where I can find the sources. I don't see them in CVS.
THANK YOU!!
Regards,
craig vanderborgh
voxware incorporated
Christian Pell wrote:
>On Tue, 2004-12-14 at 02:41 -0500, Craig A. Vanderborgh wrote:
>
>
>>Now, what I REALLY need is to get PCMCIA working w/u-boot and this
>>board. Specifically, I need to be able to use dhcp/tftp from u-boot
>>
>>
>to
>
>
>>download images to configure the board in the field. Initially, I
>>
>>
>need
>
>
>>ne2000 support, but later on I'll have to have 802.11b card support.
>>
>>It appears that I need some sample source that illustrates how to
>>
>>
>bring
>
>
>>up PCMCIA on the PXA255/SA1111. I have not been able to find a good
>>example of this so far, and I am hoping (praying??) that someone out
>>
>>
>in
>
>
>Hi,
>
>I submitted a patch for NE2000 support on PXA/PCMCIA, really don't know
>why it didn't go into the trunk. Anyway take a look:
>
>http://sourceforge.net/mailarchive/message.php?msg_id=9617953
>
>I've tested it with a couple of different NE2000 cards (Belkin, Pretec),
>I would like to hear any more feedbacks. Please note that 802.11b are
>much worse beasts and they come with licensing problems too since
>usually you have to download some firmware and such.
>
>Bye,
>
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2004-12-14 8:21 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-12-14 7:41 [U-Boot-Users] u-boot PCMCIA Support w/ PXA-255?? Craig A. Vanderborgh
2004-12-14 8:03 ` Christian Pell
2004-12-14 8:15 ` Craig A. Vanderborgh
2004-12-14 8:21 ` Christian Pell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox