From mboxrd@z Thu Jan 1 00:00:00 1970 From: nitinn Date: Tue, 12 Jun 2007 23:54:44 -0700 (PDT) Subject: [U-Boot-Users] Are there any instructions how to compile U-boot for ixp425 target? In-Reply-To: <11055125.post@talk.nabble.com> References: <330EC2471BF24E48B513AF1A6975EB690C82F4@MAIL-UA.ccs.local> <200706071344.06051.sr@denx.de> <11055125.post@talk.nabble.com> Message-ID: <11093703.post@talk.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi , I too am new in this field but working on same thing but on IXP420 Platform for Router board. Will Let u know once i am done . Keep going till then . Best of luck . Hope others also reply to us ..... Warm Regards Nitin Queenie wrote: > > Hi, > > Iam a newbie to this field. I too Iam trying to port a bootloader on my > customed IXP425 board. > Iam using Ixdp425 as my reference. > > I have downloaded U-boot 1.1.3 verson. Also I have downloaded a cross > compiler from gnu site cross-3.0 for arm architecture. > My first step was to untar the arm cross-3.0 toolchain and place it in the > /usr/local/ directory. > Then I added this path in the .bash_profile file > ($PATH=/usr/local/3.0/bin) > Then i untarred the u-boot 1.1.3 source, went into the directory and did a > make ixdp425_config > It did successfully, later I tried compiling the source for U-boot by > giving a simple make. > it started fine but later gave the error searching for IxNpeMicrocode.c. > I went to the download centre, and downloaded the npe (IxNpeMicrocode.c > and placed it in the u-boot-1.1.6/ixp/cpu/ixp/npe) > then did the "make" again. > Now its again giving error for the file IxEthAccDataPlane.c > > Can you please help me how to go ahaed with this? > > Is my cross complier the wrong one? Is there any place where I can check > it the endianness ? > > Please help! > > Warm Regards > Queenie > > > > Stefan Roese wrote: >> >> On Thursday 07 June 2007, Teemu Keskinarkaus wrote: >>> I took the advice and tried fresh u-boot. I pulled latest u-boot-ixp >>> from GIT and modified the include/configs/ixdp425.h file so that it >>> would match my current one on those parts that has something to do with >>> the hardware. That's only file I modified. >> >> OK. >> >>> Then I gave commands: >>> >>> make ARCH=arm CROSS_COMPILE=armeb-unknown-linux-gnu- ixpd425_config >>> >>> make ARCH=arm CROSS_COMPILE=armeb-unknown-linux-gnu- >>> >>> The latter command stopped to error: >>> >>> make -C cpu/ixp/npe/ >>> >>> make[1]: Entering directory >>> `/home/teemu/tmp/u-boot/u-boot-ixp/cpu/ixp/npe' >>> >>> make[1]: *** No rule to make target `IxNpeMicrocode.c', needed by >>> `.depend'. Stop. >> >> >> Yes, that's expected. Unfortunately not documented. Sorry. >> >>> I checked and that file is missing so I'm guessing here comes the part >>> where I need the Intel library? >> >> Right. >> >>> I tried to search for instructions what >>> to do, but I couldn't find any and I vaguely remember someone telling >>> that there isn't at least for ixp. This is first time I'm trying to get >>> the U-boot to work from the scratch so (detailed) instructions would >>> help a lot. >> >> You have to download the NPE microcode binary (exactly this missing file >> from >> the Intel download site). Here a link for the newest microcode (I have >> *not* >> tested with this microcode version): >> >> http://downloadcenter.intel.com/detail_desc.aspx?ProductID=2100&DwnldID=12954&agr=Y >> >> Could be that you have to register to access this file though. >> >> Best regards, >> Stefan >> >> ===================================================================== >> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel >> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany >> Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de >> ===================================================================== >> >> ------------------------------------------------------------------------- >> This SF.net email is sponsored by DB2 Express >> Download DB2 Express C - the FREE version of DB2 express and take >> control of your XML. No limits. Just data. Click to get it now. >> http://sourceforge.net/powerbar/db2/ >> _______________________________________________ >> U-Boot-Users mailing list >> U-Boot-Users at lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/u-boot-users >> >> > > -- View this message in context: http://www.nabble.com/Are-there-any-instructions-how-to-compile-U-boot-for-ixp425-target--tf3882453.html#a11093703 Sent from the Uboot - Users mailing list archive at Nabble.com.