From mboxrd@z Thu Jan  1 00:00:00 1970
From: Leif Lindholm <leif.lindholm@i3micro.com>
Date: Tue, 28 Jun 2005 13:20:05 +0200
Subject: [U-Boot-Users] Anyone actively using U-Boot with AMD Alchemy
	Au15xx?
In-Reply-To: <ecb4efd105062621077e4a0c05@mail.gmail.com>
References: <ecb4efd105062621077e4a0c05@mail.gmail.com>
Message-ID: <1119957605.2978.8.camel@localhost>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Mon, 2005-06-27 at 00:07 -0400, Clem Taylor wrote:
> Hi,
> 
> I'm currently using yamon with our Au1550 based board and I am
> considering switching over to U-Boot. Looking over the mailing list, I
> only saw a few messages that refer to Alchemy processors and I am
> concerned that the Au1xxx port isn't actively used. Anyone using
> U-Boot with an Alchemy processor?

Yes, I'm using u-boot with au1550 - although based on 1.1.1, not current
CVS. The relevant modifications should be in CVS, though.

Unfortunately, I don't have access to any db1550 boards any more, so I
am unable to verify that code just now. Will continue _that_ discussion
in a different thread.

/
	Leif