[U-Boot-Users] Re: MIPS LE build problems

[Matej Kupljen <matej.kupljen@ultra.si>]

Hi

> > I think the board linker scripts also need to be modified to
> > work with either big or little endian toolchains like below.  The third
> > argument to OUTPUT_FORMAT is only used for explicitly little endian
> > compilation.
> 
> Thanks for pointing out. I was only able to compile the code, not  to
> actually run it.

I am running little endian on DBAU1200.

> > I would suggest doing it by config name and putting ENDIANNESS in
> > config.mk something like so (untested):
> 
> I disagree. This is IMHO not a good idea.  I  think  the  tool  chain
> should  "know" which endian mode it is. I don;t ike the ide to encode
> this in a build target name:

How can we determine that?

> > dbau1550_config \
> > dbau1550_el_config	:	unconfig
> 
> Why do we need two build targets at all? I think there should be just
> one "dbau1550" target, and your setting of  CROSS_COMPILE  determines
> if this is a little or a big endian build.

CROSS_COMPILE could be set to anything. It could be:
- mipsel-linux
- 4kc_le-linux
- mips-little-linux
- ...
Is this true?

BR,
Matej