From: alebas at televes.com <alebas@televes.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Booting MPC8272ADS from flash base
Date: Mon, 17 Oct 2005 12:29:45 +0200 [thread overview]
Message-ID: <1129544985.43537d196113a@webmail.televes.com:443> (raw)
In-Reply-To: <51DB8827D393D411BB69003048003F4601D96B83@tvesntr>
Alex,
Again at work. I have some comment over those changes
> For the record here is the change I needed to make to u-boot-1.1.3.
>
> Index: board/mpc8260ads/config.mk
> ===================================================================
> RCS file: /newcvs/pq2-linux/u-boot/board/mpc8260ads/config.mk,v
> retrieving revision 1.1.1.1
> diff -u -r1.1.1.1 config.mk
> --- board/mpc8260ads/config.mk 24 Aug 2005 12:16:55 -0000 1.1.1.1
> +++ board/mpc8260ads/config.mk 14 Oct 2005 08:36:46 -0000
> @@ -29,4 +29,4 @@
> # MPC8260ADS, MPC8266ADS, and PQ2FADS-ZU/VR boards
> #
>
> -TEXT_BASE = 0xfff00000
> +TEXT_BASE = 0xff800000
Are you sure you are using u-boot-1.1.3?
Patch from Jerry Van Baren already made some changes to this file
to allow the use of a different TEXT__BASE for lowboot in MPC8272ADS
selecting it from Makefile config target.
I have this changes already applied in 1.1.3.
> Index: include/configs/MPC8260ADS.h
> ===================================================================
> RCS file: /newcvs/pq2-linux/u-boot/include/configs/MPC8260ADS.h,v
> retrieving revision 1.1.1.1
> diff -u -r1.1.1.1 MPC8260ADS.h
> --- include/configs/MPC8260ADS.h 24 Aug 2005 12:17:01 -0000 1.1.1.1
> +++ include/configs/MPC8260ADS.h 14 Oct 2005 08:36:46 -0000
> @@ -294,13 +294,8 @@
> #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
> #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
>
> +#define CFG_HRCW_MASTER 0x0e72b605 /* like BCSR version, but with CIP=1,
> BMS=1 */
In order lowboot patch from Jerry to work (which has been applied to
u-boot source, so I recommned you to use) in MPC8272ADS, ISB must also
be ISB=100, not ISB=010 as in BCSR.
Also, from MPC8272RM, bits 20-21 are reserved and should be cleared.
So, LBPC=00, although 01 works.
And finally a question. You use MODCK_H = 0101 whereas I use in my
patch MODCK_H=1010, while trying to set MODCK to 1010_100.
Am I mis-understanding something?
Best regards,
Alex Bastos
next parent reply other threads:[~2005-10-17 10:29 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <51DB8827D393D411BB69003048003F4601D96B83@tvesntr>
2005-10-17 10:29 ` alebas at televes.com [this message]
2005-10-18 10:18 ` [U-Boot-Users] Booting MPC8272ADS from flash base Alex Zeffertt
2005-10-18 14:07 ` Alex BASTOS
2005-10-13 11:24 Alex Zeffertt
2005-10-13 11:55 ` Jerry Van Baren
2005-10-13 14:12 ` Alex Zeffertt
2005-10-13 17:51 ` Yuli Barcohen
2005-10-14 8:42 ` Alex Zeffertt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='1129544985.43537d196113a@webmail.televes.com:443' \
--to=alebas@televes.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox