From: Matthew McClintock <msm@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] U-Boot 1.1.3 does not boot with MPC8349E
Date: Wed, 19 Oct 2005 02:00:50 -0500 [thread overview]
Message-ID: <1129705250.8992.4.camel@localhost.localdomain> (raw)
In-Reply-To: <9730895.1128960948159.JavaMail.ngmail@webmail-07.arcor-online.net>
Did you find a solution to your problem? Neil Chu just sent a patch in
today that corrects values in the MPC8349 readme. Can you give a listing
of the commands you used to program the new u-boot onto your board?
-Matthew
On Mon, 2005-10-10 at 18:15 +0200, flobe01 at arcor.de wrote:
> Has anybody tried to bring up U-Boot 1.1.3 together with a (Power Quicc II Pro) MPC8349E MDS Processor Board (silicon rev 1.0)? The board comes with a (probably patched) 1.1.2 version installed. I want to update it to 1.1.3 in order to be able to use a current Linux kernel (2.6.13 - U-Boot 1.1.2 seems to be incompatible due to differences in the bd_info structures, right?).
>
> After building U-Boot and writing to the flash according to the README, the board does show no more signs of life (apart from the reset sequence leds) after hard reset.
>
> I used crosstool 0.38 for building the tool chain with a standard ppc target (-mcpu=powerpc) and gcc 3.4.1.
>
> Are there any board settings necessary other than those defaults in the Getting Started guide?
>
> Thanks and regards,
> Florian.
>
>
> Machen Sie aus 14 Cent spielend bis zu 100 Euro!
> Die neue Gaming-Area von Arcor - ?ber 50 Onlinespiele im Angebot.
> http://www.arcor.de/rd/emf-gaming-1
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by:
> Power Architecture Resource Center: Free content, downloads, discussions,
> and more. http://solutions.newsforge.com/ibmarch.tmpl
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
next prev parent reply other threads:[~2005-10-19 7:00 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-10 16:15 [U-Boot-Users] U-Boot 1.1.3 does not boot with MPC8349E flobe01 at arcor.de
2005-10-10 20:38 ` Jeff Angielski
2005-10-10 21:00 ` Wolfgang Denk
2005-10-10 23:00 ` Kumar Gala
2005-10-11 2:09 ` Jeff Angielski
2005-10-19 7:00 ` Matthew McClintock [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-10-19 7:12 Chu hanjin-r52514
2005-10-19 7:23 Florian Behrens
2005-10-19 7:30 Chu hanjin-r52514
2005-10-19 8:16 Florian Behrens
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1129705250.8992.4.camel@localhost.localdomain \
--to=msm@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox