From mboxrd@z Thu Jan 1 00:00:00 1970 From: Queenie Date: Wed, 27 Jun 2007 02:47:02 -0700 (PDT) Subject: [U-Boot-Users] passing parameters to kernel from u-boot 1.1.6 Message-ID: <11321419.post@talk.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Everybody, Iam working on changing the bootloader from redboot to u-boot 1.1.6 for my customised target board having IXP422 chipset. The board had two files, one was the redboot bootloader (bin) file and second was the Image ( Kernel & Application .rmt) file. I guess that this Image file would not be dependent on the bootloader. Am i rite? I have managed to get the console and network of U-boot 1.1.6 up on my customised board with the help of this forum :) Now I would like to port the existing Image. How can I do it. Can anyone help me with this? I have tried changing the "bootfile" env variable with the location of my image and reset the board, it gives the load address as 0x200000 then loading and some # hash's as if its loading something, inbetweens it gives, "bad checksum" and ends with the statement "bad magic number" then i tried giving "tftpboot 0x00200000 uImage" it did almost the same , load address 0x200000, loading with some Hash # and then then gav ethe number of bytes tranfered, this time no error message. then i tried bootm 0x200000but it said... booting image at 0x00200000 and then BAD MAGIC NUMBER. how should i proceed with this. Pl Help! Queenie -- View this message in context: http://www.nabble.com/passing-parameters-to-kernel-from-u-boot-1.1.6-tf3987274.html#a11321419 Sent from the Uboot - Users mailing list archive at Nabble.com.