[U-Boot-Users] passing parameters to kernel from u-boot 1.1.6

[Queenie <queenie245@gmail.com>]

Hi,

 I tried mkimage comand on the host system where i had complied u-boot 1.1.6

localhost:$ mkimage -A arm -O linux -T kernel -C none -a 0x8000 -e 0x8000 -n
"Linux 2.4" -d linux.bin uImage.bin 
where linux.bin was the Image (kernel+application+fs) which was earlier used
by my redboot bootloader.

Can someone let me know how we can decide the RAM address? how can we
determine 0x8000 or something else. ?? i tried 0x200000 also but it didnt
work. 

When my u-boot boots, it says 
 
From server 192.168.5.12; our IP address is 192.168.5.215
Filename 'uImage'.
Load address: 0x200000
Loading: ##################################################
done
Bytes transferred = 6721600 (669040 hex)


## Booting image at 00200000 ...
Image Name: Linux 2.4
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 6721536 Bytes = 6.4 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Starting kernel ...

and then it restarts and agian does the same and restarts... 

Help me!

Queenie




nicky geerts wrote:
> 
> U can use mkimage to make your binary image (kernel + fs), it is
> included with the u-boot sources in the tools directory.
> 
> Nicky
> 
> 2007/6/27, Queenie <queenie245@gmail.com>:
>>
>> Hi Everybody,
>>
>> Iam working on changing the bootloader from redboot to u-boot 1.1.6 for
>> my
>> customised target board having IXP422 chipset.
>> The board had two files, one was the redboot bootloader (bin) file and
>> second was the Image ( Kernel & Application .rmt) file. I guess that this
>> Image file would not be dependent on the bootloader. Am i rite?
>>
>> I have managed to get the console and network of U-boot 1.1.6 up on my
>> customised board with the help of this forum :)
>>
>> Now I would like to port the existing Image. How can I do it. Can anyone
>> help me with this?
>>
>> I have tried changing the "bootfile" env variable with the location of my
>> image and reset the board, it gives the load address as 0x200000 then
>> loading and some # hash's as if its loading something, inbetweens it
>> gives,
>> "bad checksum" and ends with the statement "bad magic number"
>>
>> then i tried giving "tftpboot 0x00200000 uImage" it did almost the same ,
>> load address 0x200000, loading with some Hash # and then then gav ethe
>> number of bytes tranfered, this time no error message.
>> then i  tried bootm 0x200000but it said... booting image at 0x00200000
>> and
>> then BAD MAGIC NUMBER.
>>
>> how should i proceed with this. Pl Help!
>>
>> Queenie
>> --
>> View this message in context:
>> http://www.nabble.com/passing-parameters-to-kernel-from-u-boot-1.1.6-tf3987274.html#a11321419
>> Sent from the Uboot - Users mailing list archive at Nabble.com.
>>
>>
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by DB2 Express
>> Download DB2 Express C - the FREE version of DB2 express and take
>> control of your XML. No limits. Just data. Click to get it now.
>> http://sourceforge.net/powerbar/db2/
>> _______________________________________________
>> U-Boot-Users mailing list
>> U-Boot-Users at lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>>
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
> 
> 

-- 
View this message in context: http://www.nabble.com/passing-parameters-to-kernel-from-u-boot-1.1.6-tf3987274.html#a11341599
Sent from the Uboot - Users mailing list archive at Nabble.com.