[U-Boot-Users] [PATCH 03/10 v3]: mpc7448hpc2 platform support header file

[Zang Roy-r61911 <tie-fei.zang@freescale.com>]

On Fri, 2006-11-03 at 00:16, Sam Song wrote:
> Hi,
> 
> The following feedback can be considered for next
> fixes. Not to take effect on this patchset apply.
> 

Sam,
	Based on your comments, I have generate the following patch base on my
previous patch(v3 version).
	At the same time, the update is reflected on my git repo 

http://opensource.freescale.com/git?p=u-boot-7448hpc2.git;a=summary

	Thanks for your comment.

Roy

=====================================================================
Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
Both work. 0xFF000000 seems more reasonable.

Signed-off-by: Roy Zang	<tie-fei.zang@freescale.com>

---

 board/mpc7448hpc2/config.mk |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/board/mpc7448hpc2/config.mk b/board/mpc7448hpc2/config.mk
index 9147a5c..2e58858 100644
--- a/board/mpc7448hpc2/config.mk
+++ b/board/mpc7448hpc2/config.mk
@@ -21,7 +21,7 @@ # MA 02111-1307 USA
 #
 
 # Flash address
-TEXT_BASE = 0xFFF00000
+TEXT_BASE = 0xFF000000
 # RAM address
 #TEXT_BASE = 0x00400000
 
-- 
1.4.0
=======================================================================

Remove some unused CFG define.
undef CFG_DRAM_TEST

Signed-off-by: Roy Zang	<tie-fei.zang@freescale.com>

---
 include/configs/mpc7448hpc2.h |   15 +++------------
 1 files changed, 3 insertions(+), 12 deletions(-)

diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
index 9243d58..24cc86b 100644
--- a/include/configs/mpc7448hpc2.h
+++ b/include/configs/mpc7448hpc2.h
@@ -149,10 +149,6 @@ #define CONFIG_GATEWAYIP    172.27.255.2
 #define CONFIG_BOOTFILE     zImage.initrd.elf
 #define CONFIG_LOADADDR     0x400000
 
-#define CONFIG_TESTDRAMDATA     y
-#define CONFIG_TESTDRAMADDRESS  n
-#define CONFIG_TESETDRAMWALK    n
-
 /*-------------------------------------------------------------------------- */
 
 #define CONFIG_LOADS_ECHO   0	/* echo off for serial download */
@@ -163,10 +159,6 @@ #undef CONFIG_WATCHDOG		/* watchdog disa
 #define CONFIG_BOOTP_MASK  (CONFIG_BOOTP_DEFAULT | \
                             CONFIG_BOOTP_BOOTFILESIZE)
 
-/* Flash banks JFFS2 should use */
-#define CFG_JFFS2_FIRST_BANK   1
-#define CFG_JFFS2_NUM_BANKS    1
-
 #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
 		| CFG_CMD_ASKENV \
 		| CFG_CMD_CACHE \
@@ -174,7 +166,6 @@ #define CONFIG_COMMANDS (CONFIG_CMD_DFL 
 		| CFG_CMD_I2C \
 		| CFG_CMD_SDRAM \
 		| CFG_CMD_EEPROM \
-		| CFG_CMD_NET \
 		| CFG_CMD_FLASH \
 		| CFG_CMD_ENV \
 		| CFG_CMD_BSP \
@@ -220,7 +211,7 @@ #define CFG_DRAM_TEST
  *   CFG_DRAM_TEST_DATA - Enables test for shorted or open data lines
  *			  Environment variable 'test_dram_data' must be
  *			  set to 'y'.
- *   CFG_DRAM_TEST_DATA - Enables test to verify that each word is uniquely
+ *   CFG_DRAM_TEST_ADDRESS - Enables test to verify that each word is uniquely
  *			  addressable. Environment variable
  *			  'test_dram_address' must be set to 'y'.
  *   CFG_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
@@ -228,10 +219,10 @@ #define CFG_DRAM_TEST
  *			  Environment variable 'test_dram_walk' must be
  *			  set to 'y'.
  */
-#define CFG_DRAM_TEST
-#if defined(CFG_DRAM_TEST)
+#undef CFG_DRAM_TEST
 #define CFG_MEMTEST_START       0x00400000	/* memtest works on */
 #define CFG_MEMTEST_END         0x07c00000	/* 4 ... 124 MB in DRAM */
+#if defined(CFG_DRAM_TEST)
 #define CFG_DRAM_TEST_DATA
 #define CFG_DRAM_TEST_ADDRESS
 #define CFG_DRAM_TEST_WALK
-- 
1.4.0