* [U-Boot-Users] LAN9118 ethernet controller
@ 2006-12-02 1:50 William Feng
2006-12-04 8:09 ` Jonas Mark
0 siblings, 1 reply; 3+ messages in thread
From: William Feng @ 2006-12-02 1:50 UTC (permalink / raw)
To: u-boot
Hi,
I have an ARM board which has a LAN9118 ethernet controller (SMSC)
instead of a LAN91C111 which is supported in u-boot. Is there any
existing patch or ongoing work to support it?
Thanks,
-William
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot-Users] LAN9118 ethernet controller
2006-12-02 1:50 [U-Boot-Users] LAN9118 ethernet controller William Feng
@ 2006-12-04 8:09 ` Jonas Mark
0 siblings, 0 replies; 3+ messages in thread
From: Jonas Mark @ 2006-12-04 8:09 UTC (permalink / raw)
To: u-boot
Hi William,
> I have an ARM board which has a LAN9118 ethernet controller (SMSC)
> instead of a LAN91C111 which is supported in u-boot. Is there any
> existing patch or ongoing work to support it?
To my understanding the SMSC LAN91C111 and the LAN911x family are quite
different. So a simple patch is most likely not enough. The good news is
that SMSC offers a Linux driver for download (see
http://www.smsc.com/main/catalog/lan9115.html). So you could start from
there.
Regards,
Mark Jonas
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot-Users] LAN9118 ethernet controller
[not found] <1165945608.4772.19.camel@dopey>
@ 2006-12-13 9:01 ` Jonas Mark
0 siblings, 0 replies; 3+ messages in thread
From: Jonas Mark @ 2006-12-13 9:01 UTC (permalink / raw)
To: u-boot
Hello William,
> Hi, Jonas,
>
> Sorry I missed you email until today. Thanks very much for you kind
> response.
You are welcome.
> I did downloaded the code from SMSC and got a patch from another
> developer. I think I am on the right path to make it work.
If it is possible please send a patch to the U-Boot mailing list once
you are done. Most likely the patch that Tim Braun posted will be of
great help for you.
Please always keep the mailing list on copy when replying posts.
> Thanks again!
>
> William
> On Mon, 2006-12-04 at 09:09 +0100, Jonas Mark (ST-FIR/ENG1) wrote:
> > Hi William,
> >
> > > I have an ARM board which has a LAN9118 ethernet controller (SMSC)
> > > instead of a LAN91C111 which is supported in u-boot. Is there any
> > > existing patch or ongoing work to support it?
> >
> > To my understanding the SMSC LAN91C111 and the LAN911x family are
quite
> > different. So a simple patch is most likely not enough. The good
news is
> > that SMSC offers a Linux driver for download (see
> > http://www.smsc.com/main/catalog/lan9115.html). So you could start
from
> > there.
> >
> > Regards,
> > Mark Jonas
Regards,
Mark Jonas
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-12-13 9:01 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-12-02 1:50 [U-Boot-Users] LAN9118 ethernet controller William Feng
2006-12-04 8:09 ` Jonas Mark
[not found] <1165945608.4772.19.camel@dopey>
2006-12-13 9:01 ` Jonas Mark
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox