[U-Boot-Users] [PATCH] CPM I/O port pin functions for MPC85xx

[Murray.Jensen at csiro.au <Murray.Jensen@csiro.au>]

On Mon, 11 Jul 2005 12:08:11 +0200, "Fillod Stephane" writes:
>I would better cast my vote for the "CPM2 Config" and "MPC85XX ioports"
>patches from Jon Loeliger.

I have no objection to the patches you mention above - I believe the patch
I posted and the two you mention should be able to co-exist.

My patch is fairly benign - its purpose is to allow code that already exists
in U-Boot for the 8260 platform to also work on the 8560 platform (since the
two share the CPM2 in common).

I need this because we have a new Hymod board based on the 8560 which is
almost identical to our old 8260-based board - and I re-use most of the old
code for the new board.

In fact, both the old board port (now called hymod1) and the new board port
(hymod2) use the same board directory ("board/hymod") when building. I will
be posting the Hymod board port changes soon. Cheers!
								Murray...
-- 
Murray Jensen, CSIRO Manufacturing & Infra. Tech.      Phone: +61 3 9662 7763
Locked Bag No. 9, Preston, Vic, 3072, Australia.         Fax: +61 3 9662 7853
Internet: Murray.Jensen at csiro.au

To the extent permitted by law, CSIRO does not represent, warrant and/or
guarantee that the integrity of this communication has been maintained or
that the communication is free of errors, virus, interception or interference.

The information contained in this e-mail may be confidential or privileged.
Any unauthorised use or disclosure is prohibited. If you have received this
e-mail in error, please delete it immediately and notify Murray Jensen on
+61 3 9662 7763. Thank you.