[U-Boot-Users] [PATCH 2/2] Add support for SBC8641D

[Jon Loeliger <jdl@freescale.com>]

On Thu, 2007-08-09 at 15:11, Joe Hamman wrote:
> Add support for Wind River's SBC8641D reference board.
> 
> Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>


Joe,

I have applied both of your SBC8641 patches to the -mpc86xx
custodian tree now.  Note, however, that they have been applied
on top of the PCI rework patches that happened a bit earlier
in our tree.  As those patches have already been pulled upstream,
we will need to do some minor re-work of your PCI initialization
to make it work again.

Just to make some progress here, I have applied your patches,
but have _disabled_ the PCI with an "#undef PCI" in the config
file for now.  Doing this allows the board to build and MAKEALL
to be happy.  We'll call this progress.

Please take a look at the mpc8641hpcn.c file for how it now
sets up and calls fsl_pci_init() instead of pci_mpc86xx_init().
I hope this is pretty clear and workable for you.

When you have this working, I will apply it to the -mpc86xx
custodian tree and request Wolfgang pull it!  To that end,
please try to get that to me before the close of this merge
window on the 17th.

Thanks!
jdl