[U-Boot-Users] [PATCH] Add ULi 526x Ethernet driver support in U-boot

[Zang Roy-r61911 <tie-fei.zang@freescale.com>]

On Wed, 2007-10-31 at 23:32, Ben Warren wrote:
> Hi Roy,
> 
> This patch doesn't apply to top-of tree. Some reasons are below:
> 
> Zang Roy-r61911 wrote:
> > From: Roy Zang <tie-fei.zang@freescale.com>
> >
> > Add ULi 526x Ethernet driver support in U-boot.
> > Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
> > ---
> > It has been tested on MPC8610HPCD board.
> > Any feedback welcome.
> >  drivers/Makefile  |    2 +-
> >  drivers/uli526x.c | 1009
> +++++++++++++++++++++++++++++++++++++++++++++++++++++
> >  net/eth.c         |    4 +
> >  3 files changed, 1014 insertions(+), 1 deletions(-)
> >  create mode 100644 drivers/uli526x.c
> >
> > diff --git a/drivers/Makefile b/drivers/Makefile
> > index 3ee6312..08e139b 100755
> > -- a/drivers/Makefile
> >   
> My version of git (1.5.2.5) yaks at the '--' instead of '---'. All
> diffs 
> in your patch are this way
It is strange. Maybe it is caused by forward under evolution? 
Any way, I will regenerate the patch.
> > +++ b/drivers/Makefile
> > @@ -38,7 +38,7 @@ COBJS       = 3c589.o 5701rls.o ali512x.o at45.o
> ata_piix.o atmel_usart.o \
> >         omap24xx_i2c.o pci.o pci_auto.o pci_indirect.o \
> >         pcnet.o plb2800_eth.o \
> >         ps2ser.o ps2mult.o pc_keyb.o \
> > -       rtl8019.o rtl8139.o rtl8169.o \
> > +       rtl8019.o rtl8139.o rtl8169.o uli526x.o\
> >   
> Top-of tree has some different driver entries.
> Please re-submit after fixing these errors.
> 
> The patch itself looks reasonably sound, although I didn't know
> anybody 
> was making this chip any more.
Mpc8610hpcd board is using it.
The board users can benefit from the code.
I have some improvement of the driver. I will submit it again.
Roy