[U-Boot-Users] [PATCH] Remove bit swapping in Xilinx Spartan bitfile loading

[Matthias Fuchs <matthias.fuchs@esd-electronics.com>]

This patch removes the unnecessary bit swapping when
booting .bit files with the 'fpga loadb' command.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
---
 common/cmd_fpga.c |   37 +------------------------------------
 1 files changed, 1 insertions(+), 36 deletions(-)

diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c
index 3affeba..6ede031 100644
--- a/common/cmd_fpga.c
+++ b/common/cmd_fpga.c
@@ -62,12 +62,9 @@ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
 {
 #if defined(CONFIG_FPGA_XILINX)
 	unsigned int length;
-	unsigned char* swapdata;
 	unsigned int swapsize;
 	char buffer[80];
-	unsigned char *ptr;
 	unsigned char *dataptr;
-	unsigned char data;
 	unsigned int i;
 	int rc;
 
@@ -145,39 +142,7 @@ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
 	dataptr+=4;
 	printf("  bytes in bitstream = %d\n", swapsize);
 
-	/* check consistency of length obtained */
-	if (swapsize >= size) {
-		printf("%s: Could not find right length of data in bitstream\n",
-			__FUNCTION__);
-		return FPGA_FAIL;
-	}
-
-	/* allocate memory */
-	swapdata = (unsigned char *)malloc(swapsize);
-	if (swapdata == NULL) {
-		printf("%s: Could not allocate %d bytes memory !\n",
-			__FUNCTION__, swapsize);
-		return FPGA_FAIL;
-	}
-
-	/* read data into memory and swap bits */
-	ptr = swapdata;
-	for (i = 0; i < swapsize; i++) {
-		data = 0x00;
-		data |= (*dataptr & 0x01) << 7;
-		data |= (*dataptr & 0x02) << 5;
-		data |= (*dataptr & 0x04) << 3;
-		data |= (*dataptr & 0x08) << 1;
-		data |= (*dataptr & 0x10) >> 1;
-		data |= (*dataptr & 0x20) >> 3;
-		data |= (*dataptr & 0x40) >> 5;
-		data |= (*dataptr & 0x80) >> 7;
-		*ptr++ = data;
-		dataptr++;
-	}
-
-	rc = fpga_load(dev, swapdata, swapsize);
-	free(swapdata);
+	rc = fpga_load(dev, dataptr, swapsize);
 	return rc;
 #else
 	printf("Bitstream support only for Xilinx devices\n");
-- 
1.5.3