public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Kumar Gala <galak@kernel.crashing.org>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH 11/18] Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
Date: Thu, 29 Nov 2007 15:21:01 -0600	[thread overview]
Message-ID: <11963712823588-git-send-email-galak@kernel.crashing.org> (raw)
In-Reply-To: <11963712813067-git-send-email-galak@kernel.crashing.org>

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 cpu/mpc85xx/cpu.c |   96 -----------------------------------------------------
 cpu/mpc85xx/pci.c |   27 ---------------
 2 files changed, 0 insertions(+), 123 deletions(-)

diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index bbc5444..50ff3b4 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -30,11 +30,6 @@
 #include <command.h>
 #include <asm/cache.h>
 
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#endif
-
-
 int checkcpu (void)
 {
 	sys_info_t sysinfo;
@@ -258,94 +253,3 @@ int dma_xfer(void *dest, uint count, void *src) {
 	return dma_check();
 }
 #endif
-
-
-#ifdef CONFIG_OF_FLAT_TREE
-void
-ft_cpu_setup(void *blob, bd_t *bd)
-{
-	u32 *p;
-	ulong clock;
-	int len;
-
-	clock = bd->bi_busfreq;
-	p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len);
-	if (p != NULL)
-		*p = cpu_to_be32(clock);
-
-	p = ft_get_prop(blob, "/qe at e0080000/" OF_CPU "/bus-frequency", &len);
-	if (p != NULL)
-		*p = cpu_to_be32(clock);
-
-	p = ft_get_prop(blob, "/" OF_SOC "/serial at 4500/clock-frequency", &len);
-	if (p != NULL)
-		*p = cpu_to_be32(clock);
-
-	p = ft_get_prop(blob, "/" OF_SOC "/serial at 4600/clock-frequency", &len);
-	if (p != NULL)
-		*p = cpu_to_be32(clock);
-
-#if defined(CONFIG_HAS_ETH0)
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet at 24000/mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enetaddr, 6);
-
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet at 24000/local-mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enetaddr, 6);
-#endif
-
-#if defined(CONFIG_HAS_ETH1)
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet at 25000/mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enet1addr, 6);
-
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet at 25000/local-mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enet1addr, 6);
-#endif
-
-#if defined(CONFIG_HAS_ETH2)
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet at 26000/mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enet2addr, 6);
-
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet at 26000/local-mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enet2addr, 6);
-
-#ifdef CONFIG_UEC_ETH
-	p = ft_get_prop(blob, "/" OF_QE "/ucc at 2000/mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enet2addr, 6);
-
-	p = ft_get_prop(blob, "/" OF_QE "/ucc at 2000/local-mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enet2addr, 6);
-
-#endif
-#endif
-
-#if defined(CONFIG_HAS_ETH3)
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet at 27000/mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enet3addr, 6);
-
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet at 27000/local-mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enet3addr, 6);
-
-#ifdef CONFIG_UEC_ETH
-	p = ft_get_prop(blob, "/" OF_QE "/ucc at 3000/mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enet3addr, 6);
-
-	p = ft_get_prop(blob, "/" OF_QE "/ucc at 3000/local-mac-address", &len);
-	if (p)
-		memcpy(p, bd->bi_enet3addr, 6);
-
-#endif
-#endif
-
-}
-#endif
diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c
index 35e96d9..d9f49c8 100644
--- a/cpu/mpc85xx/pci.c
+++ b/cpu/mpc85xx/pci.c
@@ -29,10 +29,6 @@
 #include <asm/cpm_85xx.h>
 #include <pci.h>
 
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#endif
-
 #if defined(CONFIG_PCI)
 
 static struct pci_controller *pci_hose;
@@ -216,27 +212,4 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
 	hose->last_busno = pci_hose_scan(hose);
 #endif
 }
-
-#ifdef CONFIG_OF_FLAT_TREE
-void
-ft_pci_setup(void *blob, bd_t *bd)
-{
-	u32 *p;
-	int len;
-
-	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci at 8000/bus-range", &len);
-	if (p != NULL) {
-		p[0] = pci_hose[0].first_busno;
-		p[1] = pci_hose[0].last_busno;
-	}
-
-#ifdef CONFIG_MPC85XX_PCI2
-	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci at 9000/bus-range", &len);
-	if (p != NULL) {
-		p[0] = pci_hose[1].first_busno;
-		p[1] = pci_hose[1].last_busno;
-	}
-#endif
-}
-#endif /* CONFIG_OF_FLAT_TREE */
 #endif /* CONFIG_PCI */
-- 
1.5.3.4

  reply	other threads:[~2007-11-29 21:21 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-11-29 21:20 [U-Boot-Users] [PATCH 00/18] MPC85xx Updates Kumar Gala
2007-11-29 21:20 ` [U-Boot-Users] [PATCH 01/18] Add libfdt based ft_cpu_setup for mpc85xx Kumar Gala
2007-11-29 21:20   ` [U-Boot-Users] [PATCH 02/18] Update MPC8544DS to use libfdt Kumar Gala
2007-11-29 21:20     ` [U-Boot-Users] [PATCH 03/18] Update MPC8544 DS config Kumar Gala
2007-11-29 21:20       ` [U-Boot-Users] [PATCH 04/18] Stop using immap_t for guts offset on 85xx Kumar Gala
2007-11-29 21:20         ` [U-Boot-Users] [PATCH 05/18] Stop using immap_t for cpm " Kumar Gala
2007-11-29 21:20           ` [U-Boot-Users] [PATCH 06/18] Update MPC8560 ADS to use libfdt Kumar Gala
2007-11-29 21:20             ` [U-Boot-Users] [PATCH 07/18] Update MPC8540 " Kumar Gala
2007-11-29 21:20               ` [U-Boot-Users] [PATCH 08/18] Update MPC85xx CDS " Kumar Gala
2007-11-29 21:20                 ` [U-Boot-Users] [PATCH 09/18] Add PCI Express support on MPC8568MDS Kumar Gala
2007-11-29 21:21                   ` [U-Boot-Users] [PATCH 10/18] Update MPC8568 MDS to use libfdt Kumar Gala
2007-11-29 21:21                     ` Kumar Gala [this message]
2007-11-29 21:21                       ` [U-Boot-Users] [PATCH 12/18] Stop using immap_t on 85xx Kumar Gala
2007-11-29 21:21                         ` [U-Boot-Users] [PATCH 13/18] Use standard LAWAR_TRGT_IF_* defines for LAW setup " Kumar Gala
2007-11-29 21:21                           ` [U-Boot-Users] [PATCH 14/18] Move the MPC8568 MDS board under board/freescale Kumar Gala
2007-11-29 21:21                             ` [U-Boot-Users] [PATCH 15/18] Move the MPC8560 ADS " Kumar Gala
2007-11-29 21:21                               ` [U-Boot-Users] [PATCH 16/18] Move the MPC8540 " Kumar Gala
2007-11-29 21:21                                 ` [U-Boot-Users] [PATCH 17/18] Move the MPC8541/MPC8555/MPC8548 CDS " Kumar Gala
2007-11-29 21:21                                   ` [U-Boot-Users] [PATCH 18/18] Update Freescale MPC85xx ADS/CDS/MDS board config Kumar Gala

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=11963712823588-git-send-email-galak@kernel.crashing.org \
    --to=galak@kernel.crashing.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox