From: Kumar Gala <galak@kernel.crashing.org>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH 18/18] Update Freescale MPC85xx ADS/CDS/MDS board config
Date: Thu, 29 Nov 2007 15:21:08 -0600 [thread overview]
Message-ID: <11963712901671-git-send-email-galak@kernel.crashing.org> (raw)
In-Reply-To: <1196371289922-git-send-email-galak@kernel.crashing.org>
* Removed some misc environment setup
* Enabled CONFIG_CMDLINE_EDITING
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
include/configs/MPC8540ADS.h | 1 +
include/configs/MPC8541CDS.h | 1 +
include/configs/MPC8548CDS.h | 90 +-----------------------------------------
include/configs/MPC8555CDS.h | 1 +
include/configs/MPC8560ADS.h | 1 +
include/configs/MPC8568MDS.h | 1 +
6 files changed, 7 insertions(+), 88 deletions(-)
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 006644d..55510f3 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -437,6 +437,7 @@
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index fc1b367..d7eb5fa 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -429,6 +429,7 @@ extern unsigned long get_clock_freq(void);
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 95256f7..eace283 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -490,6 +490,7 @@ extern unsigned long get_clock_freq(void);
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
@@ -563,72 +564,6 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_BAUDRATE 115200
-#if defined(CONFIG_PCIE1)
-#define PCIE_ENV \
- "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
- "echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
- "pcieerr=md ${a}020 1; md ${a}e00 e; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
- "pci d.w $b.0 56 1; pci d $b.0 104 1; pci d $b.0 110 1;" \
- "pci d $b.0 130 1\0" \
- "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff; pci w.b $b.0 7 ff;" \
- "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff; pci w $b.0 104 ffffffff;"\
- "pci w $b.0 110 ffffffff; pci w $b.0 130 ffffffff\0" \
- "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \
- "pcie1regs=setenv a e000a; run pciereg\0" \
- "pcie1cfg=setenv b 3; run pciecfg\0" \
- "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \
- "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0"
-#else
-#define PCIE_ENV ""
-#endif
-
-#if defined(CONFIG_PCI1) || defined(CONFIG_PCI2)
-#define PCI_ENV \
- "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
- "echo e;md ${a}e00 9\0" \
- "pcierr=md ${a}e00 8; pci d.b $b.0 7 1;pci d.w $b.0 1e 1;" \
- "pci d.w $b.0 56 1\0" \
- "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \
- "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0"
-#else
-#define PCI_ENV ""
-#endif
-
-#if defined(CONFIG_PCI1)
-#define PCI_ENV1 \
- "pci1regs=setenv a e0008; run pcireg\0" \
- "pci1err=setenv a e0008; setenv b 0; run pcierr\0" \
- "pci1errc=setenv a e0008; setenv b 0; run pcierrc\0"
-#else
-#define PCI_ENV1 ""
-#endif
-
-#if defined(CONFIG_PCI2)
-#define PCI_ENV2 \
- "pci2regs=setenv a e0009; run pcireg\0" \
- "pci2err=setenv a e0009; setenv b 123; run pcierr\0" \
- "pci2errc=setenv a e0009; setenv b 123; run pcierrc\0"
-#else
-#define PCI_ENV2 ""
-#endif
-
-#if defined(CONFIG_TSEC_ENET)
-#define ENET_ENV \
- "enetreg1=md ${a}000 2; md ${a}010 9; md ${a}050 4; md ${a}08c 1;" \
- "md ${a}098 2\0" \
- "enetregt=echo t;md ${a}100 6; md ${a}140 2; md ${a}180 10; md ${a}200 10\0" \
- "enetregr=echo r;md ${a}300 6; md ${a}330 5; md ${a}380 10; md ${a}400 10\0" \
- "enetregm=echo mac;md ${a}500 5; md ${a}520 28;echo fifo;md ${a}a00 1;" \
- "echo mib;md ${a}680 31\0" \
- "enetreg=run enetreg1; run enetregm; run enetregt; run enetregr\0" \
- "enet1regs=setenv a e0024; run enetreg\0" \
- "enet2regs=setenv a e0025; run enetreg\0" \
- "enet3regs=setenv a e0026; run enetreg\0" \
- "enet4regs=setenv a e0027; run enetreg\0"
-#else
-#define ENET_ENV ""
-#endif
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
@@ -642,28 +577,7 @@ extern unsigned long get_clock_freq(void);
"ramdiskaddr=2000000\0" \
"ramdiskfile=ramdisk.uboot\0" \
"fdtaddr=c00000\0" \
- "fdtfile=mpc8548cds.dtb\0" \
- "eoi=mw e00400b0 0\0" \
- "iack=md e00400a0 1\0" \
- "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \
- "md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \
- "ddrregs=setenv a e0002; run ddrreg\0" \
- "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \
- "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \
- "guregs=setenv a e00e0; run gureg\0" \
- "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \
- "ecmregs=setenv a e0001; run ecmreg\0" \
- "lawregs=md e0000c08 4b\0" \
- "lbcregs=md e0005000 36\0" \
- "dma0regs=md e0021100 12\0" \
- "dma1regs=md e0021180 12\0" \
- "dma2regs=md e0021200 12\0" \
- "dma3regs=md e0021280 12\0" \
- PCIE_ENV \
- PCI_ENV \
- PCI_ENV1 \
- PCI_ENV2 \
- ENET_ENV
+ "fdtfile=mpc8548cds.dtb\0"
#define CONFIG_NFSBOOTCOMMAND \
"setenv bootargs root=/dev/nfs rw " \
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 76631c6..8ae4ef0 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -429,6 +429,7 @@ extern unsigned long get_clock_freq(void);
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index a24ac15..cdd8ad4 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -467,6 +467,7 @@
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CFG_LOAD_ADDR 0x1000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 2f4bc70..2cf48fb 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -458,6 +458,7 @@ extern unsigned long get_clock_freq(void);
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
--
1.5.3.4
prev parent reply other threads:[~2007-11-29 21:21 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-29 21:20 [U-Boot-Users] [PATCH 00/18] MPC85xx Updates Kumar Gala
2007-11-29 21:20 ` [U-Boot-Users] [PATCH 01/18] Add libfdt based ft_cpu_setup for mpc85xx Kumar Gala
2007-11-29 21:20 ` [U-Boot-Users] [PATCH 02/18] Update MPC8544DS to use libfdt Kumar Gala
2007-11-29 21:20 ` [U-Boot-Users] [PATCH 03/18] Update MPC8544 DS config Kumar Gala
2007-11-29 21:20 ` [U-Boot-Users] [PATCH 04/18] Stop using immap_t for guts offset on 85xx Kumar Gala
2007-11-29 21:20 ` [U-Boot-Users] [PATCH 05/18] Stop using immap_t for cpm " Kumar Gala
2007-11-29 21:20 ` [U-Boot-Users] [PATCH 06/18] Update MPC8560 ADS to use libfdt Kumar Gala
2007-11-29 21:20 ` [U-Boot-Users] [PATCH 07/18] Update MPC8540 " Kumar Gala
2007-11-29 21:20 ` [U-Boot-Users] [PATCH 08/18] Update MPC85xx CDS " Kumar Gala
2007-11-29 21:20 ` [U-Boot-Users] [PATCH 09/18] Add PCI Express support on MPC8568MDS Kumar Gala
2007-11-29 21:21 ` [U-Boot-Users] [PATCH 10/18] Update MPC8568 MDS to use libfdt Kumar Gala
2007-11-29 21:21 ` [U-Boot-Users] [PATCH 11/18] Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now " Kumar Gala
2007-11-29 21:21 ` [U-Boot-Users] [PATCH 12/18] Stop using immap_t on 85xx Kumar Gala
2007-11-29 21:21 ` [U-Boot-Users] [PATCH 13/18] Use standard LAWAR_TRGT_IF_* defines for LAW setup " Kumar Gala
2007-11-29 21:21 ` [U-Boot-Users] [PATCH 14/18] Move the MPC8568 MDS board under board/freescale Kumar Gala
2007-11-29 21:21 ` [U-Boot-Users] [PATCH 15/18] Move the MPC8560 ADS " Kumar Gala
2007-11-29 21:21 ` [U-Boot-Users] [PATCH 16/18] Move the MPC8540 " Kumar Gala
2007-11-29 21:21 ` [U-Boot-Users] [PATCH 17/18] Move the MPC8541/MPC8555/MPC8548 CDS " Kumar Gala
2007-11-29 21:21 ` Kumar Gala [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11963712901671-git-send-email-galak@kernel.crashing.org \
--to=galak@kernel.crashing.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox