From mboxrd@z Thu Jan  1 00:00:00 1970
From: vibi <vibi_sreenivasan@cms.com>
Date: Mon, 17 Dec 2007 16:20:41 +0530
Subject: [U-Boot-Users] error compiling u-boot 1.1.5 for at91sam9260ek
In-Reply-To: <476385E0.5010309@koansoftware.com>
References: <1197700267.2679.20.camel@root> <476385E0.5010309@koansoftware.com>
Message-ID: <1197888641.2848.44.camel@root>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

hi,
	i have tried that patch.but when i compile the source for at91sam9260ek
i am getting error that u-boot uses soft floating point where as
libgcc.a in my cross-compiler tool chain uses hard floating point . 
but i compiled a working u-boot for at91rm9200dk using this tool chain,
and here also -msoft-float option was given.

has any one faced this kind of problem before?

thanks & regards
vibi sreenivasan

On Sat, 2007-12-15 at 08:44 +0100, Marco Cavallini wrote:
> vibi ha scritto:
> > hello,
> > 	is there any one working on porting u-boot 1.1.5 to at91sam9260 soc.
> > 
> > i am going to do this activity,if there is anyone who is already working
> > on this please let me know.
> > 
> 
> vibi,
> this project already exists :-)
> 
> Getting the AT91 u-boot bootloader
> ---------------------------------------
> To get the u-boot bootloader up and running on an AT91 product you have
> to go through the following steps:
> 
>    1. identify on which u-boot revision the patches will apply
>    2. download the corresponding u-boot
> 
>       # wget ftp://ftp.denx.de/pub/u-boot/u-boot-x.x.x.tar.bz2
>       # tar xvjf u-boot-x.x.x.tar.bz2
>       # cd cd u-boot-x.x.x
> 
>    3. take the AT91 u-boot patch set and apply it on top of the original
> u-boot:
> 
>       # wget
> http://www.at91.com/repFichier/Project-218/u-boot-x.x.x_atmel_y.y.diff.bz2
>       # bzcat u-boot-x.x.x_atmel_y.y.diff.bz2 | patch -p1
> 
> You will now have a fresh copy of the AT91 u-boot.
>