From: dirk.behme at googlemail.com <dirk.behme@googlemail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH] ARM: Davinci: Fix DM644x timer overflow handling and cleanup
Date: Mon, 24 Mar 2008 15:58:10 +0100 [thread overview]
Message-ID: <1206370690-25824-1-git-send-email-dirk.behme@gmail.com> (raw)
Fix ARM based DaVinci DM644x timer overflow handling and cleanup timer code.
Changes:
- Remove *_masked() functions as noted by Wolfgang
- Adapt register naming to recent TI spec (sprue26, March 2007)
- Fix reset_timer() handling
- As reported by Pieter [1] the overflow fix introduced a delay of factor 16 (e.g 2 seconds became 32). While the overflow fix is basically okay, it missed to divide CFG_HZ_CLOCK by 16, too. Fix this.
[1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
- Remove software division of timer count value (DIV(x) macro) and do it in hardware (TIM_CLK_DIV).
Many thanks to Troy Kisky <troy.kisky@boundarydevices.com> for his hints!
Patch is compile tested with davinci_dvevm & sonata & schmoogie configuration. Anybody can test it on real hardware? Pieter?
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Index: uboot_davinci/cpu/arm926ejs/davinci/timer.c
===================================================================
--- uboot_davinci.orig/cpu/arm926ejs/davinci/timer.c
+++ uboot_davinci/cpu/arm926ejs/davinci/timer.c
@@ -42,9 +42,9 @@
typedef volatile struct {
u_int32_t pid12;
- u_int32_t emumgt_clksped;
- u_int32_t gpint_en;
- u_int32_t gpdir_dat;
+ u_int32_t emumgt;
+ u_int32_t na1;
+ u_int32_t na2;
u_int32_t tim12;
u_int32_t tim34;
u_int32_t prd12;
@@ -52,21 +52,11 @@ typedef volatile struct {
u_int32_t tcr;
u_int32_t tgcr;
u_int32_t wdtcr;
- u_int32_t tlgc;
- u_int32_t tlmr;
} davinci_timer;
davinci_timer *timer = (davinci_timer *)CFG_TIMERBASE;
#define TIMER_LOAD_VAL (CFG_HZ_CLOCK / CFG_HZ)
-#define READ_TIMER timer->tim34
-
-/*
- * Timer runs with CFG_HZ_CLOCK, currently 27MHz. To avoid wrap
- * around of timestamp already after min ~159s, divide it, e.g. by 16.
- * timestamp will then wrap around all min ~42min
- */
-#define DIV(x) ((x) >> 4)
static ulong timestamp;
static ulong lastinc;
@@ -76,63 +66,51 @@ int timer_init(void)
/* We are using timer34 in unchained 32-bit mode, full speed */
timer->tcr = 0x0;
timer->tgcr = 0x0;
- timer->tgcr = 0x06;
+ timer->tgcr = 0x06 | ((TIM_CLK_DIV - 1) << 8);
timer->tim34 = 0x0;
timer->prd34 = TIMER_LOAD_VAL;
lastinc = 0;
- timer->tcr = 0x80 << 16;
timestamp = 0;
+ timer->tcr = 2 << 22;
return(0);
}
void reset_timer(void)
{
- reset_timer_masked();
-}
-
-ulong get_timer(ulong base)
-{
- return(get_timer_masked() - base);
-}
-
-void set_timer(ulong t)
-{
- timestamp = t;
-}
-
-void udelay(unsigned long usec)
-{
- udelay_masked(usec);
-}
-
-void reset_timer_masked(void)
-{
- lastinc = DIV(READ_TIMER);
+ timer->tcr = 0x0;
+ timer->tim34 = 0;
+ lastinc = 0;
timestamp = 0;
+ timer->tcr = 2 << 22;
}
-ulong get_timer_raw(void)
+static ulong get_timer_raw(void)
{
- ulong now = DIV(READ_TIMER);
+ ulong now = timer->tim34;
if (now >= lastinc) {
/* normal mode */
timestamp += now - lastinc;
} else {
/* overflow ... */
- timestamp += now + DIV(TIMER_LOAD_VAL) - lastinc;
+ timestamp += now + TIMER_LOAD_VAL - lastinc;
}
lastinc = now;
return timestamp;
}
-ulong get_timer_masked(void)
+ulong get_timer(ulong base)
+{
+ return(get_timer_raw() - base);
+}
+
+void set_timer(ulong t)
{
- return(get_timer_raw() / DIV(TIMER_LOAD_VAL));
+ timestamp = t;
}
-void udelay_masked(unsigned long usec)
+void udelay(unsigned long usec)
{
ulong tmo;
ulong endtime;
@@ -165,8 +143,5 @@ unsigned long long get_ticks(void)
*/
ulong get_tbclk(void)
{
- ulong tbclk;
-
- tbclk = CFG_HZ;
- return(tbclk);
+ return CFG_HZ;
}
Index: uboot_davinci/include/configs/davinci_dvevm.h
===================================================================
--- uboot_davinci.orig/include/configs/davinci_dvevm.h
+++ uboot_davinci/include/configs/davinci_dvevm.h
@@ -58,7 +58,8 @@
#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */
#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
-#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
+#define TIM_CLK_DIV 16
+#define CFG_HZ_CLOCK (27000000/TIM_CLK_DIV) /* Timer clock freq */
#define CFG_HZ 1000
/*====================================================*/
/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
Index: uboot_davinci/include/configs/davinci_schmoogie.h
===================================================================
--- uboot_davinci.orig/include/configs/davinci_schmoogie.h
+++ uboot_davinci/include/configs/davinci_schmoogie.h
@@ -33,7 +33,8 @@
#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */
#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
-#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
+#define TIM_CLK_DIV 16
+#define CFG_HZ_CLOCK (27000000/TIM_CLK_DIV) /* Timer clock freq */
#define CFG_HZ 1000
/*=============*/
/* Memory Info */
Index: uboot_davinci/include/configs/davinci_sonata.h
===================================================================
--- uboot_davinci.orig/include/configs/davinci_sonata.h
+++ uboot_davinci/include/configs/davinci_sonata.h
@@ -58,7 +58,8 @@
#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */
#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
-#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
+#define TIM_CLK_DIV 16
+#define CFG_HZ_CLOCK (27000000/TIM_CLK_DIV) /* Timer clock freq */
#define CFG_HZ 1000
/*====================================================*/
/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
next reply other threads:[~2008-03-24 14:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-24 14:58 dirk.behme at googlemail.com [this message]
2008-03-25 10:06 ` [U-Boot-Users] RE: [PATCH] ARM: Davinci: Fix DM644x timer overflow handling and cleanup Pieter Voorthuijsen
2008-03-25 10:19 ` [U-Boot-Users] " Dirk Behme
2008-03-25 15:45 ` [U-Boot-Users] " Pieter Voorthuijsen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1206370690-25824-1-git-send-email-dirk.behme@gmail.com \
--to=dirk.behme@googlemail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox