[U-Boot-Users] [PATCH] Add support for setting the I2C bus speed in fsl_i2c.c

Wolfgang Denk
2008-03-26T23:12:14Z

In message <1205534729-26151-1-git-send-email-timur@freescale.com> you wrote:
> Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying
> the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro,
> but fsl_i2c.c ignores it and uses conservative value when programming the
> I2C bus speed.
>
> Signed-off-by: Timur Tabi <timur@freescale.com>

Applied with Andy's ACK.

I have to admit that I don't like the impact on the memory footprint
of the driver.

And to make sure I understand this correctly: is it correct to assume
that this driver has never been tested with environment in a EEPROM?

Best regards,

Wolfgang Denk

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Nothing ever becomes real until it is experienced. - John Keats