From: Dave Liu <r63238@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH 3/3] mpc83xx: clean up the readme for 83xx boards
Date: Tue, 15 Apr 2008 13:12:23 +0800 [thread overview]
Message-ID: <1208236343.3656.4.camel@localhost.localdomain> (raw)
1. correct the typo
2. correct the memory map for 837xerdb board
Signed-off-by: Dave Liu <daveliu@freescale.com>
---
doc/README.mpc8313erdb | 4 ++--
doc/README.mpc8315erdb | 2 +-
doc/README.mpc837xemds | 2 +-
doc/README.mpc837xerdb | 13 ++++++-------
4 files changed, 10 insertions(+), 11 deletions(-)
diff --git a/doc/README.mpc8313erdb b/doc/README.mpc8313erdb
index 7ad4cc7..21580f9 100644
--- a/doc/README.mpc8313erdb
+++ b/doc/README.mpc8313erdb
@@ -3,10 +3,10 @@ Freescale MPC8313ERDB Board
1. Board Switches and Jumpers
- SW3 is used to set CFG_RESET_SOURCE.
+ S3 is used to set CFG_RESET_SOURCE.
To boot the image at 0xFE000000 in NOR flash, use these DIP
- switche settings for SW3 SW4:
+ switch settings for S3 S4:
+------+ +------+
| | | **** |
diff --git a/doc/README.mpc8315erdb b/doc/README.mpc8315erdb
index c630cf8..e77eba7 100644
--- a/doc/README.mpc8315erdb
+++ b/doc/README.mpc8315erdb
@@ -6,7 +6,7 @@ Freescale MPC8315ERDB Board
S3 is used to set CFG_RESET_SOURCE.
To boot the image at 0xFE000000 in NOR flash, use these DIP
- switche settings for S3 S4:
+ switch settings for S3 S4:
+------+ +------+
| | | **** |
diff --git a/doc/README.mpc837xemds b/doc/README.mpc837xemds
index 3f0cdf7..7823595 100644
--- a/doc/README.mpc837xemds
+++ b/doc/README.mpc837xemds
@@ -49,7 +49,7 @@ Freescale MPC837xEMDS Board
0xe010_0000 0xe02f_ffff Empty 2M
0xe030_0000 0xe03f_ffff PCI IO 1M
0xe040_0000 0xe05f_ffff Empty 2M
- 0xe060_0000 0xe060_8000 NAND Flash 32K
+ 0xe060_0000 0xe060_7fff NAND Flash 32K
0xf400_0000 0xf7ff_ffff Empty 64M
0xf800_0000 0xf800_7fff BCSR on CS1 32K
0xfe00_0000 0xffff_ffff NOR Flash on CS0 32M
diff --git a/doc/README.mpc837xerdb b/doc/README.mpc837xerdb
index 8f0192a..510e3bb 100644
--- a/doc/README.mpc837xerdb
+++ b/doc/README.mpc837xerdb
@@ -1,4 +1,4 @@
-Freescale MPC837xEMDS Board
+Freescale MPC837xE-RDB Board
-----------------------------------------
1. Board Description
@@ -38,12 +38,11 @@ Freescale MPC837xEMDS Board
=========================== ================= ======= =========
0x0000_0000 0x0fff_ffff DDR 256M 64
0x1000_0000 0x7fff_ffff Empty 1.75G -
- 0x8000_0000 0x9fff_ffff PCI1 memory space 512M 32
- 0xa000_0000 0xbfff_ffff PCI2 memory space 512M 32
- 0xc200_0000 0xc2ff_ffff PCI1 I/O space 16M 32
- 0xc300_0000 0xc3ff_ffff PCI2 I/O space 16M 32
+ 0x8000_0000 0x8fff_ffff PCI MEM prefetch 256M 32
+ 0x9000_0000 0x9fff_ffff PCI MEM non-prefetch 256M 32
+ 0xe030_0000 0xe03f_ffff PCI I/O space 1M 32
0xe000_0000 0xe00f_ffff Int Mem Reg Space 1M -
- 0xe280_0000 0xe47f_ffff NAND Flash 32M 8
+ 0xe060_0000 0xe060_7fff NAND Flash 32K 8
0xfe00_0000 0xfe7f_ffff NOR Flash on CS0 8M 16
@@ -55,7 +54,7 @@ Freescale MPC837xEMDS Board
CONFIG_MPC83XX MPC83xx family for both MPC8349 and MPC8360
CONFIG_MPC837X MPC837x specific
- CONFIG_MPC837XERDB MPC837XEMDS board specific
+ CONFIG_MPC837XERDB MPC837xE-RDB board specific
4. Compilation
--
1.5.4.rc4
reply other threads:[~2008-04-15 5:12 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1208236343.3656.4.camel@localhost.localdomain \
--to=r63238@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox