From mboxrd@z Thu Jan  1 00:00:00 1970
From: Adam Nowak <uboot@op.pl>
Date: Sat, 24 May 2008 11:28:23 +0200
Subject: [U-Boot-Users] RapidIO on custom board (MPC8548 )
Message-ID: <1211621303.2763.9.camel@localhost.localdomain>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Thanks John. 

I should explain that I have only MPC8548 on the board. Other elements
with access via RapidIO will be on another board which is not connected
now. I guess that the common transport size does not matter in this case
because we do not have any communication.

Should I assume that the most probable reason of hung up i the mapping
of memory? The kernel hung up in function in_be32(regs_win + RIO_CCSR).
This is access to configuration register.

Thanks,
Adam

On Mon, 2008-05-19 at 09:22 +0100, John Traill wrote:
> Adam,
> 
> Make sure you have matching common transport sizes in your system -
Section 4.4.3.16 RapidIO System Size in the 8548 manual.
>