From: Kumar Gala <galak@kernel.crashing.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 12/15] fdt: refactor fdt resize code
Date: Fri, 15 Aug 2008 08:24:42 -0500 [thread overview]
Message-ID: <1218806685-3615-12-git-send-email-galak@kernel.crashing.org> (raw)
In-Reply-To: <1218806685-3615-11-git-send-email-galak@kernel.crashing.org>
Move the fdt resizing code out of ppc specific boot code and into
common fdt support code.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
common/fdt_support.c | 39 +++++++++++++++++++++++++++++++++++++++
include/fdt_support.h | 1 +
lib_ppc/bootm.c | 32 ++++----------------------------
3 files changed, 44 insertions(+), 28 deletions(-)
diff --git a/common/fdt_support.c b/common/fdt_support.c
index 93b144e..dadb294 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -529,3 +529,42 @@ void fdt_fixup_crypto_node(void *blob, int sec_rev)
fdt_strerror(err));
}
#endif /* defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) */
+
+/* Resize the fdt to its actual size + a bit of padding */
+int fdt_resize(void *blob)
+{
+ int i;
+ uint64_t addr, size;
+ int total, ret;
+ uint actualsize;
+
+ if (!blob)
+ return 0;
+
+ total = fdt_num_mem_rsv(blob);
+ for (i = 0; i < total; i++) {
+ fdt_get_mem_rsv(blob, i, &addr, &size);
+ if (addr == (uint64_t)(u32)blob) {
+ fdt_del_mem_rsv(blob, i);
+ break;
+ }
+ }
+
+ /* Calculate the actual size of the fdt */
+ actualsize = fdt_off_dt_strings(blob) +
+ fdt_size_dt_strings(blob);
+
+ /* Make it so the fdt ends on a page boundary */
+ actualsize = ALIGN(actualsize, 0x1000);
+ actualsize = actualsize - ((uint)blob & 0xfff);
+
+ /* Change the fdt header to reflect the correct size */
+ fdt_set_totalsize(blob, actualsize);
+
+ /* Add the new reservation */
+ ret = fdt_add_mem_rsv(blob, (uint)blob, actualsize);
+ if (ret < 0)
+ return ret;
+
+ return actualsize;
+}
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 761f85c..b3f0adb 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -69,6 +69,7 @@ void ft_pci_setup(void *blob, bd_t *bd);
#endif
void set_working_fdt_addr(void *addr);
+int fdt_resize(void *blob);
#endif /* ifdef CONFIG_OF_LIBFDT */
#endif /* ifndef __FDT_SUPPORT_H */
diff --git a/lib_ppc/bootm.c b/lib_ppc/bootm.c
index b86169a..300e00a 100644
--- a/lib_ppc/bootm.c
+++ b/lib_ppc/bootm.c
@@ -162,38 +162,14 @@ do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
/* Fixup the fdt memreserve now that we know how big it is */
if (of_flat_tree) {
- int j;
- uint64_t addr, size;
- int total = fdt_num_mem_rsv(of_flat_tree);
- uint actualsize;
-
- for (j = 0; j < total; j++) {
- fdt_get_mem_rsv(of_flat_tree, j, &addr, &size);
- if (addr == (uint64_t)(u32)of_flat_tree) {
- fdt_del_mem_rsv(of_flat_tree, j);
- break;
- }
- }
-
/* Delete the old LMB reservation */
lmb_free(lmb, (phys_addr_t)(u32)of_flat_tree,
(phys_size_t)fdt_totalsize(of_flat_tree));
- /* Calculate the actual size of the fdt */
- actualsize = fdt_off_dt_strings(of_flat_tree) +
- fdt_size_dt_strings(of_flat_tree);
-
- /* Make it so the fdt ends on a page boundary */
- actualsize = ALIGN(actualsize, 0x1000);
- actualsize = actualsize - ((uint)of_flat_tree & 0xfff);
-
- /* Change the fdt header to reflect the correct size */
- fdt_set_totalsize(of_flat_tree, actualsize);
- of_size = actualsize;
-
- /* Add the new reservation */
- ret = fdt_add_mem_rsv(of_flat_tree, (uint)of_flat_tree,
- of_size);
+ ret = fdt_resize(of_flat_tree);
+ if (ret < 0)
+ goto error;
+ of_size = ret;
/* Create a new LMB reservation */
lmb_reserve(lmb, (ulong)of_flat_tree, of_size);
--
1.5.5.1
next prev parent reply other threads:[~2008-08-15 13:24 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-15 13:24 [U-Boot] [PATCH 01/15] Update linux bootm to support ePAPR client interface Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 02/15] Clean up usage of icache_disable/dcache_disable Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 03/15] Add command to enable/disable interrupts Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 04/15] fdt: added the ability to set initrd start/end via chosen command Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 05/15] fdt: fdt addr w/o any args reports back the current working address Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 06/15] bootm: refactor entry point code Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 07/15] bootm: refactor ramdisk locating code Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 08/15] bootm: refactor fdt locating and relocation code Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 09/15] bootm: Set working fdt address as part of the bootm flow Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 10/15] bootm: move lmb into the bootm_headers_t structure Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 11/15] bootm: refactor image detection and os load steps Kumar Gala
2008-08-15 13:24 ` Kumar Gala [this message]
2008-08-15 13:24 ` [U-Boot] [PATCH 13/15] fdt: refactor initrd related code Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 14/15] fdt: Added resize command Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 15/15] bootm: refactor do_reset and os boot function args Kumar Gala
2008-08-26 21:48 ` Wolfgang Denk
2008-08-26 21:46 ` [U-Boot] [PATCH 14/15] fdt: Added resize command Wolfgang Denk
2008-08-26 21:45 ` [U-Boot] [PATCH 13/15] fdt: refactor initrd related code Wolfgang Denk
2008-08-26 21:45 ` Wolfgang Denk
2008-08-26 21:43 ` [U-Boot] [PATCH 12/15] fdt: refactor fdt resize code Wolfgang Denk
2008-08-26 21:42 ` [U-Boot] [PATCH 11/15] bootm: refactor image detection and os load steps Wolfgang Denk
2008-08-26 21:38 ` [U-Boot] [PATCH 10/15] bootm: move lmb into the bootm_headers_t structure Wolfgang Denk
2008-08-26 21:37 ` [U-Boot] [PATCH 09/15] bootm: Set working fdt address as part of the bootm flow Wolfgang Denk
2008-08-26 21:37 ` [U-Boot] [PATCH 08/15] bootm: refactor fdt locating and relocation code Wolfgang Denk
2008-08-26 21:35 ` [U-Boot] [PATCH 07/15] bootm: refactor ramdisk locating code Wolfgang Denk
2008-08-21 12:02 ` [U-Boot] [PATCH 06/15] bootm: refactor entry point code Kumar Gala
2008-08-26 21:34 ` Wolfgang Denk
2008-08-26 21:47 ` Jerry Van Baren
2008-08-26 21:57 ` Wolfgang Denk
2008-08-27 0:07 ` Kumar Gala
2008-08-26 21:31 ` Wolfgang Denk
2008-08-18 23:07 ` [U-Boot] [PATCH 05/15] fdt: fdt addr w/o any args reports back the current working address Wolfgang Denk
2008-08-18 23:23 ` Jerry Van Baren
2008-08-20 22:56 ` Wolfgang Denk
2008-08-18 23:04 ` [U-Boot] [PATCH 04/15] fdt: added the ability to set initrd start/end via chosen command Wolfgang Denk
2008-08-20 22:56 ` Wolfgang Denk
2008-08-18 22:59 ` [U-Boot] [PATCH 03/15] Add command to enable/disable interrupts Wolfgang Denk
2008-08-18 23:18 ` Kumar Gala
2008-08-20 22:53 ` Wolfgang Denk
2008-08-18 22:57 ` [U-Boot] [PATCH 02/15] Clean up usage of icache_disable/dcache_disable Wolfgang Denk
2008-08-18 22:55 ` [U-Boot] [PATCH 01/15] Update linux bootm to support ePAPR client interface Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1218806685-3615-12-git-send-email-galak@kernel.crashing.org \
--to=galak@kernel.crashing.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox